|
|
(未显示2个用户的12个中间版本) |
第1行: |
第1行: |
− | [[Category:Linux_Operating_System]]
| + | {{DISPLAYTITLE:所有类别}} |
− | [[Category:Analog]]
| + | =开发环境相关= |
− | [[Category:IIO]]
| + | {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |
− | * [[IIO_overview]]
| + | |- valign="top" |
− | * [[IIO_libiio]]
| + | | width="33%" | |
− | * [[ADC_device_tree_configuration]]
| |
− | * [[ADC_Linux_driver ]]
| |
− | * [[DAC_device_tree_configuration ]]
| |
− | * [[DAC_Linux_driver ]]
| |
− | * [[DFSDM_device_tree_configuration ]]
| |
− | * [[DFSDM_Linux_driver ]]
| |
− | * [[How_to_use_the_IIO_user_space_interface]]
| |
− | * [[IIO_Linux_kernel_tools ]]
| |
− | * [[LPTIM_device_tree_configuration ]]
| |
− | * [[LPTIM_Linux_driver ]]
| |
− | * [[TIM_device_tree_configuration ]]
| |
− | * [[TIM_Linux_driver ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Audio]]
| |
− | [[Category:ALSA]]
| |
− | * [[ALSA_overview]]
| |
− | * [[ALSA_troubleshooting_grid ]]
| |
− | * [[How_to_play_audio ]]
| |
− | * [[How_to_record_audio ]]
| |
− | * [[I2S_device_tree_configuration ]]
| |
− | * [[I2S_Linux_driver ]]
| |
− | * [[SAI_device_tree_configuration ]]
| |
− | * [[SAI_Linux_driver ]]
| |
− | * [[Soundcard_configuration ]]
| |
− | * [[SPDIFRX_device_tree_configuration ]]
| |
− | * [[SPDIFRX_Linux_driver]]
| |
− | * [[Audio_troubleshooting_grid]]
| |
− | * [[PulseAudio]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Coprocessor_management_Linux]]
| |
− | * [[Coprocessor_management_overview]]
| |
− | * [[Coprocessor_management_troubleshooting_grid ]]
| |
− | * [[Coprocessor_resource_table ]]
| |
− | * [[Exchanging_buffers_with_the_coprocessor ]]
| |
− | * [[How_to_assign_an_internal_peripheral_to_a_runtime_context ]]
| |
− | * [[How_to_configure_system_resources ]]
| |
− | * [[How_to_protect_the_coprocessor_firmware ]]
| |
− | * [[Linux_Mailbox_framework_overview ]]
| |
− | * [[Linux_remoteproc_framework_overview ]]
| |
− | * [[Linux_RPMsg_framework_overview ]]
| |
− | * [[Resource_manager_for_coprocessing ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:Clock]]
| |
− | * [[Clock_device_tree_configuration]]
| |
− | * [[Clock_overview]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:DMA]]
| |
− | * [[DMA_device_tree_configuration ]]
| |
− | * [[Dmaengine_overview ]]
| |
− | * [[DMAMUX_device_tree_configuration]]
| |
− | * [[MDMA_device_tree_configuration ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:Hardware_spinlock]]
| |
− | * [[Hardware_spinlock_overview]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:Interrupts]]
| |
− | * [[Interrupt_overview]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:IOs_pin_management]]
| |
− | * [[Pinctrl_overview]]
| |
− | * [[GPIOLib_overview]]
| |
− | * [[GPIO_device_tree_configuration]]
| |
− | * [[How_to_control_a_GPIO_in_kernel_space]]
| |
− | * [[How_to_control_a_GPIO_in_userspace]]
| |
− | * [[Overview_of_GPIO_pins]]
| |
− | * [[Pinctrl_device_tree_configuration]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:RAM]]
| |
− | * [[Reserved_memory]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:Reset]]
| |
− | * [[Reset_device_tree_configuration]]
| |
− | * [[Reset_overview]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:RTC]]
| |
− | * [[RTC_overview]]
| |
− | * [[RTC_device_tree_configuration]]
| |
− | * [[How_to_use_RTC]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:Timers]]
| |
− | * [[PWM_overview]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Arm_architecture]]
| |
− | [[Category:Watchdog]]
| |
− | * [[Watchdog_overview]]
| |
− | * [[IWDG_device_tree_configuration]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Core]]
| |
− | [[Category:Embedded_trace_and_debug]]
| |
− | * [[Coresight_device_tree_configuration ]]
| |
− | * [[Coresight_overview ]]
| |
− | * [[HDP_device_tree_configuration ]]
| |
− | * [[HDP_Linux_driver ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:High_speed_interface]]
| |
− | [[Category:USB]]
| |
− | * [[USB_overview]]
| |
− | * [[USBH_device_tree_configuration ]]
| |
− | * [[OTG_device_tree_configuration ]]
| |
− | * [[PHY_overview ]]
| |
− | * [[USBPHYC_device_tree_configuration ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Low_speed_interface]]
| |
− | [[Category:I2C]]
| |
− | * [[I2C_i2c-tools]]
| |
− | * [[I2C_device_tree_configuration ]]
| |
− | * [[I2C_driver ]]
| |
− | * [[I2C_i2c-dev ]]
| |
− | * [[I2C_overview ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Low_speed_interface]]
| |
− | [[Category:Serial_TTY]]
| |
− | * [[Serial_TTY_overview]]
| |
− | * [[Serial_TTY_device_tree_configuration ]]
| |
− | * [[How_to_use_TTY_with_User_Terminal ]]
| |
− | * [[How_to_use_TTY_from_an_application ]]
| |
− | * [[TTY_tools ]]
| |
− | * [[Serial_TTY_line_discipline ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Low_speed_interface]]
| |
− | [[Category:SPI]]
| |
− | * [[How_to_use_SPI]]
| |
− | * [[SPI_device_tree_configuration ]]
| |
− | * [[SPI_overview ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Networking]]
| |
− | [[Category:Netdev]]
| |
− | [[Category:CAN]]
| |
− | * [[CAN_overview]]
| |
− | * [[FDCAN_device_tree_configuration ]]
| |
− | * [[How_to_send_or_receive_CAN_data ]]
| |
− | * [[How_to_set_up_a_SocketCAN_interface]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Networking]]
| |
− | [[Category:Netdev]]
| |
− | [[Category:Ethernet]]
| |
− | * [[Ethernet_device_tree_configuration ]]
| |
− | * [[Ethernet_overview ]]
| |
− | * [[How_to_configure_ethernet_interface]]
| |
− | * [[How_to_perform_ping_test ]]
| |
− | * [[How_to_perform_ssh_connection ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Networking]]
| |
− | [[Category:Netdev]]
| |
− | [[Category:WLAN]]
| |
− | * [[How_to_configure_a_wlan_interface_on_client_mode ]]
| |
− | * [[How_to_configure_a_wlan_interface_on_hotspot_mode]]
| |
− | * [[How_to_setup_wifi_connection ]]
| |
− | * [[WLAN_device_tree_configuration ]]
| |
− | * [[WLAN_overview ]]
| |
− | * [[Network_tools]]
| |
− | * [[Networking_overview]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Networking]]
| |
− | [[Category:Bluetooth]]
| |
− | * [[Bluetooth_device_tree_configuration ]]
| |
− | * [[Bluetooth_overview ]]
| |
− | * [[How_to_scan_BLE_devices ]]
| |
− | * [[How_to_scan_Bluetooth_devices ]]
| |
− | * [[How_to_set_up_a_Bluetooth_connection]]
| |
− | * [[Networking_troubleshooting_grid ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Persistent_storage]]
| |
− | [[Category:Mass_storage]]
| |
− | * [[FMC_device_tree_configuration]]
| |
− | * [[How_to_support_EXT4_through_MMC ]]
| |
− | * [[How_to_support_UBIFS_through_MTD ]]
| |
− | * [[MMC_overview ]]
| |
− | * [[MTD_overview ]]
| |
− | * [[QUADSPI_device_tree_configuration ]]
| |
− | * [[SDMMC_device_tree_configuration ]]
| |
− | * [[NVMEM_overview]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Power_and_Thermal]]
| |
− | * [[Power_overview]]
| |
− | * [[Regulator_overview]]
| |
− | * [[Thermal_overview ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Security]]
| |
− | [[Category:Crypto]]
| |
− | * [[Crypto_API_overview]]
| |
− | * [[CRC_device_tree_configuration ]]
| |
− | * [[CRYP_device_tree_configuration ]]
| |
− | * [[HASH_device_tree_configuration ]]
| |
− | * [[Hardware_random_overview ]]
| |
− | * [[How_to_control_a_RNG_in_userspace ]]
| |
− | * [[RNG_device_tree_configuration ]]
| |
− | * [[TPM_hardware_components ]]
| |
| | | |
| + | *[[Configuring_ubuntu]] |
| + | || |
| | | |
| | | |
| + | || |
| | | |
− | [[Category:Linux_Operating_System]]
| + | |} |
− | [[Category:Visual]]
| + | =Bootloard= |
− | [[Category:CEC]]
| + | {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |
− | * [[CEC_device_tree_configuration]] | + | |- valign="top" |
− | * [[CEC_overview]] | + | | width="33%" | |
| + | *[[How_to_boot_the_kernel_via_TFTP_from_U-Boot]] |
| + | *[[How_to_update_U-Boot_on_an_SD_card]] |
| + | *[[How_to_use_USB_mass_storage_in_U-Boot]] |
| + | *[[UBoot]] |
| | | |
− | [[Category:Linux_Operating_System]]
| + | | width="33%" | |
− | [[Category:Visual]]
| + | *[[UBootCmdFDT]] |
− | [[Category:DRM_KMS]]
| + | *[[UBootCmdGroupDownload]] |
− | * [[DRM_KMS_overview]]
| + | *[[UBootCmdGroupEnvironment]] |
− | * [[DRM_KMS_troubleshooting_grid ]]
| + | *[[UBootCmdGroupExec]] |
− | * [[DSI_device_tree_configuration ]]
| + | *[[UBootCmdGroupFlash]] |
− | * [[How_to_display_on_HDMI ]]
| + | | width="33%" | |
− | * [[How_to_get_DRM_KMS_logs ]]
| + | *[[UBootCmdGroupInfo]] |
− | * [[How_to_get_name_and_current_status_of_a_DRM_connector ]]
| + | *[[UBootCmdGroupMemory]] |
− | * [[How_to_modify_the_panel_backlight ]]
| + | *[[UBootCmdGroupMisc]] |
− | * [[How_to_monitor_the_display_framerate ]]
| + | *[[UBootCmdGroupSpecial]] |
− | * [[LTDC_device_tree_configuration ]]
| + | *[[UBootManual]] |
− | [[Category:Linux_Operating_System]]
| + | *[[UBootStorageDevices]] |
− | [[Category:Visual]]
| + | |} |
− | [[Category:GPU]]
| |
− | * [[EGL_backends]]
| |
− | * [[EGL_texture_0-copy ]]
| |
− | * [[GPU_device_tree_configuration ]]
| |
− | * [[GPU_troubleshooting_grid ]]
| |
− | * [[How_to_launch_glmark2_benchmark ]]
| |
− | * [[How_to_launch_Khronos_OpenGLES_conformance_tests ]]
| |
− | * [[How_to_monitor_the_GCNANO_GPU_load ]]
| |
− | * [[How_to_test_and_benchmark_OpenGLES ]]
| |
− | * [[OpenGLES_overview ]]
| |
− | * [[OpenVG_overview ]]
| |
− | * [[Vivante_GCNANO_GPU_overview ]]
| |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Visual]]
| |
− | [[Category:GStreamer]]
| |
− | * [[Gst-discoverer]]
| |
− | * [[Gst-typefind ]]
| |
− | * [[GStreamer_overview ]]
| |
− | * [[GStreamer_troubleshooting_grid]]
| |
− | * [[How_to_get_video_details ]]
| |
− | * [[How_to_make_a_camera_preview ]]
| |
− | * [[How_to_play_a_video ]]
| |
− | * [[How_to_profile_video_framerate]]
| |
− | * [[How_to_stream_camera_over_network]] | |
− | [[Category:Linux_Operating_System]] | |
− | [[Category:Visual]]
| |
− | [[Category:V4L2]]
| |
− | * [[DCMI_device_tree_configuration]] | |
− | * [[V4L2_camera_overview ]] | |
− | * [[V4l2-ctl ]] | |
− | * [[Yavta ]] | |
− | [[Category:Linux_Operating_System]]
| |
− | [[Category:Visual]]
| |
− | [[Category:Wayland_Weston]]
| |
− | * [[How_to_calibrate_the_touchscreen]] | |
− | * [[How_to_configure_the_Weston_keyboard_layout ]] | |
− | * [[How_to_configure_Weston_screen_resolution ]] | |
− | * [[How_to_debug_Weston ]] | |
− | * [[How_to_display_an_image_using_Weston ]] | |
− | * [[How_to_make_a_screen_capture_in_Weston ]] | |
− | * [[How_to_make_a_video_capture_of_Weston_desktop ]]
| |
− | * [[How_to_stop_and_start_Weston ]]
| |
− | * [[Wayland_Weston_overview ]]
| |
− | * [[Wayland_Weston_troubleshooting_grid ]]
| |
− | * [[Weston_keyboard_shortcuts ]]
| |
− | * [[Visual_troubleshooting_grid ]]
| |
| | | |
| + | =Linux内核相关= |
| | | |
| + | ==内核驱动相关== |
| | | |
| + | {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |
| + | ! 高速通信设备 !! 低速通信设备 !! 网络子系统 |
| + | |- valign="top" |
| + | | width="33%" | |
| + | *alsa声卡相关 |
| + | :*[[ALSA_overview | linux alsa声卡概述]] |
| + | :*[[ALSA_troubleshooting_grid | linux alsa声卡故障排除]] |
| + | :*[[How_to_play_audio | 如何播放音频]] |
| + | :*[[How_to_record_audio | 如何录音]] |
| + | :*[[I2S_device_tree_configuration | I2S协议如何配置设备树]] |
| + | :*[[I2S_Linux_driver | I2S协议linux驱动]] |
| + | :*[[SAI_device_tree_configuration | SAI协议设备树配置]] |
| + | :*[[SAI_Linux_driver | SAI协议Linux驱动]] |
| + | :*[[Soundcard_configuration | 声卡配置]] |
| + | :*[[SPDIFRX_device_tree_configuration | SPDIFRX协议设备树配置]] |
| + | :*[[SPDIFRX_Linux_driver | SPDIFRX协议Linux驱动]] |
| + | :*[[Audio_troubleshooting_grid | 音频故障排除]] |
| + | :*[[PulseAudio | PulseAudio工具]] |
| + | *USB设备相关 |
| + | :*[[USB overview | USB 概述 ]] |
| + | :*[[PHY overview | USB PHY 层架构概述 ]] |
| + | :*[[USBH device tree configuration | USB设备树配置 ]] |
| + | :*[[USBPHYC device tree configuration | USB PHY层设备树配置]] |
| + | :*[[OTG device tree configuration | USB OTG 设备树配置]] |
| | | |
| + | | width="33%" | |
| + | *CAN协议相关 |
| + | :*[[CAN overview | CAN协议概述]] |
| + | :*[[FDCAN device tree configuration|CAN设备树配置]] |
| + | :*[[How_to_set_up_a_SocketCAN_interface|如何设置CAN套接字接口]] |
| + | :*[[How to send or receive CAN data |如何发送或接收CAN数据]] |
| + | *串口设备相关 |
| + | :*[[ How to use TTY from an application | 如何通过app使用TTY]] |
| + | :*[[How to use TTY with User Terminal | 如何在用户终端下使用TTY]] |
| + | :*[[Serial TTY device tree configuration | 串行TTY设备树配置]] |
| + | :*[[Serial TTY line discipline | 串行TTY线路描述]] |
| + | :*[[Serial TTY overview | TTY 架构概述]] |
| + | :*[[TTY tools | TTY调试工具]] |
| + | *SPI设备相关 |
| + | :*[[SPI overview | SPI架构概述 ]] |
| + | :*[[SPI device tree configuration | SPI设备树配置]] |
| + | :*[[How to use SPI | 如何使用SPI]] |
| + | *I2C设备相关 |
| + | :*[[I2C overview | I2C协议概述]] |
| + | :*[[I2C i2c-dev | I2C设备 ]] |
| + | :*[[I2C device tree configuration | I2C设备树配置]] |
| + | :*[[I2C driver | I2C驱动]] |
| + | :*[[I2C i2c-tools | I2C测试工具]] |
| | | |
− | *[[Category:How_to ]]
| + | | width="33%" | |
− | *[[Category:How_to_customize_software ]]
| |
− | *[[How_to_add_a_customer_application ]]
| |
− | *[[How_to_assign_an_internal_peripheral_to_a_runtime_context ]]
| |
− | *[[How_to_avoid_proxy_issues ]]
| |
− | *[[How_to_change_the_CPU_frequency ]]
| |
− | *[[How_to_compile_the_device_tree_with_the_Distribution_Package ]]
| |
− | *[[How_to_configure_system_resources ]]
| |
− | *[[How_to_configure_uniprocessor_mode ]]
| |
− | *[[How_to_create_a_new_open_embedded_layer ]]
| |
− | *[[How_to_create_your_board_device_tree ]]
| |
− | *[[How_to_create_your_own_distribution ]]
| |
− | *[[How_to_create_your_own_image ]]
| |
− | *[[How_to_create_your_product_from_design_to_manufacturing ]]
| |
− | *[[How_to_customize_the_Linux_kernel ]]
| |
− | *[[How_to_disable_one_CPU ]]
| |
− | *[[How_to_install_JAVA_JDK ]]
| |
− | *[[How_to_manage_the_debian_packages_in_OpenSTLinux_distribution ]]
| |
− | *[[How_to_optimize_the_boot_time ]]
| |
− | *[[How_to_protect_the_coprocessor_firmware ]]
| |
− | *[[Menuconfig_or_how_to_configure_kernel ]]
| |
− | *[[Category:How_to_build_software ]]
| |
− | *[[How_to_build_Linux_kernel_user_space_tools ]]
| |
− | *[[How_to_compile_the_device_tree_with_the_Developer_Package ]]
| |
− | *[[How_to_create_an_SDK_for_OpenSTLinux_distribution ]]
| |
− | *[[How_to_cross-compile_with_the_Developer_Package ]]
| |
− | *[[How_to_cross-compile_with_the_Distribution_Package ]]
| |
− | *[[How_to_integrate_an_external_software_package ]]
| |
− | *[[Category:How_to_populate_boards ]]
| |
− | *[[How_to_populate_and_boot_a_board_with_OP-TEE ]]
| |
− | *[[How_to_populate_the_SD_card_with_dd_command ]]
| |
− | *[[How_to_transfer_a_file_over_network ]]
| |
− | *[[How_to_transfer_a_file_over_serial_console ]]
| |
− | *[[How_to_update_U-Boot_on_an_SD_card ]]
| |
− | *[[How_to_use_STM32CubeProgrammer_to_populate_a_board ]]
| |
− | *[[Category:How_to_run_use_cases ]]
| |
− | *[[How_to_accelerate_JPEG_compression_and_decompression ]]
| |
− | *[[How_to_activate_HSI_and_CSI_oscillators_calibration ]]
| |
− | *[[How_to_boot_the_kernel_via_TFTP_from_U-Boot ]]
| |
− | *[[How_to_calibrate_the_touchscreen ]]
| |
− | *[[How_to_configure_the_Weston_keyboard_layout ]]
| |
− | *[[How_to_configure_Weston_screen_resolution ]]
| |
− | *[[How_to_display_an_image_using_Weston ]]
| |
− | *[[How_to_display_on_HDMI ]]
| |
− | *[[How_to_enable_Jailhouse ]]
| |
− | *[[How_to_enable_the_microphone_of_a_USB_camera ]]
| |
− | *[[How_to_get_video_details ]]
| |
− | *[[How_to_launch_glmark2_benchmark ]]
| |
− | *[[How_to_launch_Khronos_OpenGLES_conformance_tests ]]
| |
− | *[[How_to_make_a_camera_preview ]]
| |
− | *[[How_to_make_a_screen_capture_in_Weston ]]
| |
− | *[[How_to_make_a_video_capture_of_Weston_desktop ]]
| |
− | *[[How_to_modify_the_panel_backlight ]]
| |
− | *[[How_to_play_a_video ]]
| |
− | *[[How_to_play_audio ]]
| |
− | *[[How_to_record_audio ]]
| |
− | *[[How_to_start_the_coprocessor_from_the_bootloader ]]
| |
− | *[[How_to_stop_and_start_Weston ]]
| |
− | *[[How_to_stream_camera_over_network ]]
| |
− | *[[How_to_support_EXT4_through_MMC ]]
| |
− | *[[How_to_support_UBIFS_through_MTD ]]
| |
− | *[[How_to_test_and_benchmark_OpenGLES ]]
| |
− | *[[How_to_use_USB_mass_storage_in_U-Boot ]]
| |
− | *[[Category:How_to_trace_and_debug ]]
| |
− | *[[How_to_access_information_in_sysfs ]]
| |
− | *[[How_to_activate_the_Gcnano_GPU_debug_mode ]]
| |
− | *[[How_to_check_that_a_device_tree_resource_is_correctly_set ]]
| |
− | *[[How_to_debug_a_Linux_kernel_crash ]]
| |
− | *[[How_to_debug_the_Gcnano_GPU_with_VTK ]]
| |
− | *[[How_to_debug_Weston ]]
| |
− | *[[How_to_detect_memory_leaks ]]
| |
− | *[[How_to_diagnose_a_boot_failure ]]
| |
− | *[[How_to_enable_earlyprintk_for_Linux_kernel ]]
| |
− | *[[How_to_find_Linux_kernel_driver_associated_to_a_device ]]
| |
− | *[[How_to_get_DRM_KMS_logs ]]
| |
− | *[[How_to_get_name_and_current_status_of_a_DRM_connector ]]
| |
− | *[[How_to_get_Terminal ]]
| |
− | *[[How_to_monitor_the_display_framerate ]]
| |
− | *[[How_to_monitor_the_GCNANO_GPU_load ]]
| |
− | *[[How_to_profile_video_framerate ]]
| |
− | *[[How_to_retrieve_Cortex-M4_logs_after_crash ]]
| |
− | *linux内核调试
| |
− | **[[Blktrace]]
| |
− | **[[Dmesg and Linux kernel log]]
| |
− | **[[Ftrace]]
| |
− | **[[Ltrace]]
| |
− | **[[LTTng]]
| |
− | **[[Strace]]
| |
− | **[[Trace-cmd and kernelshark trace viewer]]
| |
− |
| |
| | | |
− | *linux驱动 | + | *蓝牙相关 |
− | **声卡测试 | + | :*[[Bluetooth overview | 蓝牙概述 ]] |
− | ::[[ALSA_overview | linux alsa声卡概述]]
| + | :*[[Bluetooth device tree configuration | 蓝牙设备树配置]] |
− | ::[[ALSA_troubleshooting_grid | linux alsa声卡故障排除]] | + | :*[[How to scan BLE devices | 如何扫描低功耗蓝牙设备]] |
− | ::[[How_to_play_audio | 如何播放音频]]
| + | :*[[How to scan Bluetooth devices | 如何扫描标准蓝牙设备]] |
− | ::[[How_to_record_audio | 如何录音]]
| + | :*[[How to set up a Bluetooth connection |如何设置蓝牙设备连接]] |
− | ::[[I2S_device_tree_configuration | I2S协议如何配置设备树]]
| + | *WIFI设备相关 |
− | ::[[I2S_Linux_driver | I2S协议linux驱动]]
| + | :*[[WLAN overview|WIFI概述]] |
− | ::[[SAI_device_tree_configuration | SAI协议设备树配置]]
| + | :*[[WLAN device tree configuration|WIFI设备树配置]] |
− | ::[[SAI_Linux_driver | SAI协议Linux驱动]]
| + | :*[[How to configure a wlan interface on client mode | 如何配置waln设备客户端模式]] |
− | ::[[Soundcard_configuration | 声卡配置]]
| + | :*[[How to configure a wlan interface on hotspot mode|如何配置wlan设备热点模式]] |
− | ::[[SPDIFRX_device_tree_configuration | SPDIFRX协议设备树配置]]
| + | :*[[How to setup wifi connection|如何设置WiFi连接]] |
− | ::[[SPDIFRX_Linux_driver | SPDIFRX协议Linux驱动]] | + | *以太网相关 |
− | ::[[Audio_troubleshooting_grid | 音频故障排除]]
| + | :*[[Ethernet overview | 以太网概述 ]] |
− | ::[[PulseAudio | PulseAudio工具]] | + | :*[[How to configure ethernet interface | 如何配置以太网接口]] |
− | **串口设备相关
| + | :*[[Ethernet device tree configuration | 网络设备树配置]] |
− | ::[[ How to use TTY from an application | 如何通过app使用TTY]]
| + | *网络测试 |
− | ::[[How to use TTY with User Terminal | 如何在用户终端下使用TTY]] | + | :*[[How to perform ping test | 如何执行ping测试]] |
− | ::[[Serial TTY device tree configuration | 串行TTY设备树配置]]
| + | :*[[How to perform ssh connection | 如何执行SSH连接]] |
− | ::[[Serial TTY line discipline | 串行TTY线路描述]] | + | :*[[Network tools | 网络工具]] |
− | ::[[Serial TTY overview | TTY 架构概述]]
| + | :*[[Networking overview |网络概述]] |
− | ::[[TTY tools | TTY调试工具]] | + | :*[[Networking troubleshooting grid|网络故障排除]] |
− | **SPI设备相关
| |
− | ::[[SPI overview | SPI架构概述 ]]
| |
− | ::[[SPI device tree configuration | SPI设备树配置]]
| |
− | ::[[How to use SPI | 如何使用SPI]] | |
− | **USB设备相关 | |
− | ::[[USB overview | USB 概述 ]]
| |
− | ::[[PHY overview | USB PHY 层架构概述 ]] | |
− | ::[[USBH device tree configuration | USB设备树配置 ]] | |
− | ::[[USBPHYC device tree configuration | USB PHY层设备树配置]] | |
− | ::[[OTG device tree configuration | USB OTG 设备树配置]] | |
− | **I2C设备相关 | |
− | ::[[I2C overview | I2C协议概述]] | |
− | ::[[I2C i2c-dev | I2C设备 ]] | |
− | ::[[I2C device tree configuration | I2C设备树配置]] | |
− | ::[[I2C driver | I2C驱动]] | |
− | ::[[I2C i2c-tools | I2C测试工具]] | |
| | | |
− | **蓝牙相关
| + | |} |
− | ::[[Bluetooth overview | 蓝牙概述 ]]
| + | ==内核调试相关== |
− | ::[[Bluetooth device tree configuration | 蓝牙设备树配置]]
| + | {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |
− | ::[[How to scan BLE devices | 如何扫描低功耗蓝牙设备]]
| |
− | ::[[How to scan Bluetooth devices | 如何扫描标准蓝牙设备]]
| |
− | ::[[How to set up a Bluetooth connection |如何设置蓝牙设备连接]] | |
− | **CAN协议相关
| |
− | ::[[CAN overview | CAN协议概述]]
| |
− | ::[[FDCAN device tree configuration|CAN设备树配置]]
| |
− | ::[[How_to_set_up_a_SocketCAN_interface|如何设置CAN套接字接口]]
| |
− | ::[[How to send or receive CAN data |如何发送或接收CAN数据]]
| |
| | | |
| + | |- valign="top" |
| + | | width="33%" | |
| + | *[[Blktrace]] |
| + | *[[Dmesg and Linux kernel log]] |
| + | *[[Ftrace]] |
| + | *[[Ltrace]] |
| + | *[[LTTng]] |
| + | *[[Strace]] |
| + | *[[Trace-cmd and kernelshark trace viewer]] |
| + | | width="33%" | |
| + | *[[Debugfs]] |
| + | *[[Ethtool]] |
| + | *[[Ifconfig]] |
| + | *[[IP Linux command line]] |
| + | *[[Kmemleak]] |
| + | *[[Netdata]] |
| + | *[[Netstat]] |
| + | *[[Perf]] |
| + | | width="33%" | |
| + | *[[Pseudo filesystem]] |
| + | *[[Sysdig]] |
| + | *[[Sysprof]] |
| + | *[[Sysstat tool suite]] |
| + | *[[Systemtap]] |
| + | *[[Tcpdump]] |
| + | *[[Top Linux command line ]] |
| + | *[[Valgrind]] |
| + | |} |
| | | |
− | **WIFI设备相关
| + | =文件系统相关= |
− | ::[[WLAN overview|WIFI概述]]
| + | {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |
− | ::[[WLAN device tree configuration|WIFI设备树配置]] | + | |- valign="top" |
− | ::[[How to configure a wlan interface on client mode | 如何配置waln设备客户端模式]]
| + | | width="33%" | |
− | ::[[How to configure a wlan interface on hotspot mode|如何配置wlan设备热点模式]]
| + | *[[Adding_packages_to_your_OS_image]] |
− | ::[[How to setup wifi connection|如何设置WiFi连接]]
| + | *[[Adding_yocto_packages]] |
− | **以太网相关 | + | *[[How_to_accelerate_JPEG_compression_and_decompression]] |
− | ::[[Ethernet overview | 以太网概述 ]]
| + | *[[How_to_access_information_in_sysfs]] |
− | ::[[How to configure ethernet interface | 如何配置以太网接口]]
| + | *[[How_to_activate_HSI_and_CSI_oscillators_calibration]] |
− | ::[[Ethernet device tree configuration | 网络设备树配置]]
| + | *[[How_to_activate_the_Gcnano_GPU_debug_mode]] |
− | **网络测试 | + | *[[How_to_add_a_customer_application]] |
− | ::[[How to perform ping test | 如何执行ping测试]]
| + | *[[How_to_add_a_new_package_to_buildroot]] |
− | ::[[How to perform ssh connection | 如何执行SSH连接]]
| + | *[[How_to_avoid_proxy_issues]] |
− | ::[[Network tools | 网络工具]]
| + | *[[How_to_boot_the_kernel_via_TFTP_from_U-Boot]] |
− | ::[[Networking overview |网络概述]]
| + | *[[How_to_build_Linux_kernel_user_space_tools]] |
− | ::[[Networking troubleshooting grid|网络故障排除]]
| + | *[[How_to_change_the_CPU_frequency]] |
− | *Linux调试工具 | + | *[[How_to_check_that_a_device_tree_resource_is_correctly_set]] |
− | ::[[Debugfs]]
| + | *[[How_to_compile_the_device_tree_with_the_Developer_Package]] |
− | ::[[Ethtool]]
| + | *[[How_to_compile_the_device_tree_with_the_Distribution_Package]] |
− | ::[[Ifconfig]]
| + | *[[How_to_config_the_git]] |
− | ::[[IP Linux command line]]
| + | *[[How_to_configure_system_resources]] |
− | ::[[Kmemleak]]
| + | *[[How_to_configure_uniprocessor_mode]] |
− | ::[[Netdata]]
| + | *[[How_to_create_a_new_open_embedded_layer]] |
− | ::[[Netstat]]
| + | *[[How_to_create_an_SDK_for_OpenSTLinux_distribution]] |
− | ::[[Perf]]
| + | *[[How_to_create_EXT4_images]] |
− | ::[[Pseudo filesystem]]
| + | *[[How_to_create_ubi_images]] |
− | ::[[Sysdig]]
| + | *[[How_to_create_your_board_device_tree]] |
− | ::[[Sysprof]]
| |
− | ::[[Sysstat tool suite]]
| |
− | ::[[Systemtap]]
| |
− | ::[[Tcpdump]]
| |
− | ::[[Top Linux command line ]]
| |
− | ::[[Valgrind]]
| |
| | | |
| + | |width="33%" | |
| + | *[[How_to_create_your_own_distribution]] |
| + | *[[How_to_create_your_own_image]] |
| + | *[[How_to_create_your_own_machine]] |
| + | *[[How_to_create_your_product_from_design_to_manufacturing]] |
| + | *[[How_to_cross-compile_with_the_Developer_Package]] |
| + | *[[How_to_cross-compile_with_the_Distribution_Package]] |
| + | *[[How_to_customize_the_Linux_kernel]] |
| + | *[[How_to_debug_a_Linux_kernel_crash]] |
| + | *[[How_to_debug_the_Gcnano_GPU_with_VTK]] |
| + | *[[How_to_detect_memory_leaks]] |
| + | *[[How_to_diagnose_a_boot_failure]] |
| + | *[[How_to_disable_one_CPU]] |
| + | *[[How_to_enable_earlyprintk_for_Linux_kernel]] |
| + | *[[How_to_enable_Jailhouse]] |
| + | *[[How_to_enable_the_microphone_of_a_USB_camera]] |
| + | *[[How_to_get_Terminal]] |
| + | *[[How_to_install_JAVA_JDK]] |
| + | *[[How_to_install_the_git]] |
| + | *[[How_to_integrate_an_external_software_package]] |
| + | *[[How_to_manage_the_debian_packages_in_OpenSTLinux_distribution]] |
| + | *[[How_to_optimize_the_boot_time]] |
| + | *[[How_to_play_a_video]] |
| + | |width="33%" | |
| | | |
− | <categorytree mode=all background*color:white;">Linux_monitoring_tools</categorytree>
| + | *[[How_to_populate_and_boot_a_board_with_OP-TEE]] |
| + | *[[How_to_populate_the_SD_card_with_dd_command]] |
| + | *[[How_to_record_with_arecord]] |
| + | *[[How_to_set_rtc_system_clock]] |
| + | *[[How_to_setup_wifi_connection]] |
| + | *[[How_to_submit_a_git_pull_request]] |
| + | *[[How_to_transfer_a_file_over_network]] |
| + | *[[How_to_transfer_a_file_over_serial_console]] |
| + | *[[How_to_update_U-Boot_on_an_SD_card]] |
| + | *[[How_to_use_samba]] |
| + | *[[How_to_use_STM32CubeProgrammer_to_populate_a_board]] |
| + | *[[How_to_use_the_git_branch_command]] |
| + | *[[How_to_use_the_git_log_command]] |
| + | *[[How_to_use_the_git_reset_command]] |
| + | *[[How_to_use_the_rz_command_to_serially_transfer_files]] |
| + | *[[How_to_use_USB_mass_storage_in_U-Boot]] |
| + | *[[Menuconfig_or_how_to_configure_kernel]] |
| + | *[[Play_audio]] |
| + | *[[Yocto_build_system_FAQs]] |
| | | |
| + | |} |
| | | |
− | <categorytree mode=all background*color:white;">Linux_tracing_tools</categorytree>
| + | ==buildroot相关== |
| + | {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |
| + | |- valign="top" |
| + | | width="33%" | |
| + | *[[Buildroot_Audio_and_video_applications]] |
| + | *[[Buildroot_BuildOptions]] |
| + | *[[Buildroot_Compressors_and_decompressors]] |
| + | *[[Buildroot_Debugging_profiling_and_benchmark]] |
| + | *[[Buildroot_Development_tools]] |
| + | *[[Buildroot_Filesystem_and_flash_utilities]] |
| + | *[[Buildroot_Networking_applications]] |
| + | *[[How_to_add_a_new_package_to_buildroot]] |
| + | | width="33%" | |
| + | *[[Buildroot_Fonts_cursors_icons_sounds_and_themes]] |
| + | *[[Buildroot_Games]] |
| + | *[[Buildroot_Graphic_libraries_and_applications]] |
| + | *[[Buildroot_Hardware_handling]] |
| + | *[[Buildroot_Interpreter_languages_and_scripting]] |
| + | *[[Buildroot_Libraries]] |
| + | *[[Buildroot_Mail]] |
| + | *[[Buildroot_Miscellaneous]] |
| | | |
| | | |
− | *按照CPU厂商查看相关页面 | + | | width="33%" | |
− | <categorytree mode=all background*color:white;">Samsung </categorytree>
| + | *[[Buildroot_Package_managers]] |
− | <categorytree mode=all background*color:white;">TexasInstruments </categorytree>
| + | *[[Buildroot_Real-Time]] |
− | <categorytree mode=all background*color:white;">ROCKCHIP </categorytree>
| + | *[[Buildroot_Security]] |
− | <categorytree mode=all background*color:white;">ST </categorytree>
| + | *[[Buildroot_Shell_and_utilities]] |
| + | *[[Buildroot_System_tools]] |
| + | *[[Buildroot_SystemConfiguration]] |
| + | *[[Buildroot_TargetOptions]] |
| + | *[[Buildroot_Text_editors_and_viewers]] |
| + | *[[Buildroot_Toolchain]] |
| | | |
− | *按照页面创建时间
| + | |} |
− | <categorytree mode=all background*color:white;">2019 </categorytree>
| |
− | <categorytree mode=all background*color:white;">2020 </categorytree>
| |
− | *找到开发板CPU型号
| |
− | <categorytree mode=all background*color:white;">Rk3288 </categorytree>
| |
− | <categorytree mode=all background*color:white;">Rk3399 </categorytree>
| |
− | <categorytree mode=all background*color:white;">Tiny4412 </categorytree>
| |
− | <categorytree mode=all background*color:white;">Jz2440 </categorytree>
| |
− | <categorytree mode=all background*color:white;">Stm32mp157c </categorytree>
| |
− | <categorytree mode=all background*color:white;">Stm32mp157a </categorytree>
| |
− | <categorytree mode=all background*color:white;">Am335x </categorytree>
| |
− | <categorytree mode=all background*color:white;">Am437x </categorytree>
| |
− | *按照开发板使用内核版本
| |
− | <categorytree mode=all background*color:white;">LinuxKernel3.x </categorytree>
| |
− | <categorytree mode=all background*color:white;">LinuxKernel4.x </categorytree>
| |
− | <categorytree mode=all background*color:white;">LinuxKernel 2.6 </categorytree>
| |
− | <categorytree mode=all background*color:white;">LinuxKernel_5.x </categorytree>
| |
| | | |
− | *所有包含模块讲解分类
| + | ==yocto相关== |
− | <categorytree mode=all background*color:white;">光敏电阻传感器 </categorytree>
| + | {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |
− | <categorytree mode=all background*color:white;">块设备驱动 </categorytree>
| + | |- valign="top" |
− | <categorytree mode=all background*color:white;">字符设备驱动 </categorytree>
| + | | width="33%" | |
− | <categorytree mode=all background*color:white;">触摸屏驱动 </categorytree>
| + | *[[Adding_packages_to_your_OS_image]] |
− | <categorytree mode=all background*color:white;">Ds18b20温湿度传感器 </categorytree>
| + | *[[Adding_yocto_packages]] |
− | <categorytree mode=all background*color:white;">I2C驱动 </categorytree>
| + | *[[Bitbake]] |
− | <categorytree mode=all background*color:white;">Irda红外传感器 </categorytree>
| + | *[[How_to_create_your_own_image]] |
− | <categorytree mode=all background*color:white;">
| + | *[[How_to_create_your_own_machine]] |
− | *Linux各类通信协议子系统
| + | *[[Yocto]] |
− | <categorytree mode=all background*color:white;">Cache </categorytree>
| + | *[[Yocto_build_system_FAQs]] |
− | <categorytree mode=all background*color:white;">DMA驱动 </categorytree>
| + | || |
− | <categorytree mode=all background*color:white;">Directory </categorytree>
| |
− | <categorytree mode=all background*color:white;">LCD驱动 </categorytree>
| |
− | <categorytree mode=all background*color:white;">LinuxDeviceDriver </categorytree>
| |
− | <categorytree mode=all background*color:white;">Linux设备树 </categorytree>
| |
− | <categorytree mode=all background*color:white;">MMU </categorytree>
| |
− | <categorytree mode=all background*color:white;">MTD驱动 </categorytree>
| |
− | <categorytree mode=all background*color:white;">NoOs </categorytree>
| |
− | <categorytree mode=all background*color:white;">NorFlash </categorytree>
| |
− | <categorytree mode=all background*color:white;">NorFlash驱动 </categorytree>
| |
− | <categorytree mode=all background*color:white;">SDRAM </categorytree>
| |
− | <categorytree mode=all background*color:white;">SPI驱动 </categorytree>
| |
− | <categorytree mode=all background*color:white;">USB驱动 </categorytree>
| |
− | <categorytree mode=all background*color:white;">Uart </categorytree>
| |
− | <categorytree mode=all background*color:white;">V4L2 </categorytree>
| |
− | <categorytree mode=all background*color:white;">VideoWiki </categorytree>
| |
− | <categorytree mode=all background*color:white;">主页 </categorytree>
| |
| | | |
− | *各类文件系统
| + | || |
− | <categorytree mode=all background*color:white;">Yocto </categorytree>
| + | |
− | <categorytree mode=all background*color:white;">Buildroot </categorytree>
| + | |} |
− | <categorytree mode=all background*color:white;">Rootfs </categorytree>
| + | |
− | <categorytree mode=all background*color:white;">File_Systems </categorytree>
| + | ==busybox相关== |
− | *按照开发语言
| + | |
− | <categorytree mode=all background*color:white;">Java </categorytree>
| + | =应用相关= |
− | <categorytree mode=all background*color:white;">C </categorytree>
| |
− | <categorytree mode=all background*color:white;">C++ </categorytree>
| |
− | <categorytree mode=all background*color:white;">Python </categorytree>
| |
− | <categorytree mode=all background*color:white;">Html </categorytree>
| |
− | <categorytree mode=all background*color:white;">Css </categorytree>
| |
− | <categorytree mode=all background*color:white;">ShellScripts </categorytree>
| |