搜索结果

…mode, it supports high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s).<br> In Peripheral mode, high-speed and full-speed are supported, not low-speed.<br>

…high-speed (480 Mbit/s) using an '''EHCI''' controller, and full- and low- speeds (12 and 1.5 Mbit/s) through '''OHCI''' controller. <br> …terface, mapped on an on-chip 2-port '''[[USBPHYC internal peripheral|high-speed UTMI+ PHY]]'''. <br>

The I2C bus interface serves as an interface between the microcontroller and the serial I2C bus.<br> The I2C controller allows to be a slave as well if need be.<br>

High-speed data communications can be achieved by using the [[DMA internal peripheral] …he complete list of features, and to the software components, introduced below, to see which features are implemented.

…d to communicate with an external devices using the SPI (Serial Peripheral Interface).<br> …ly be used in '''audio''' applications, when they are configured as an I2S interface. Refer to [[#Peripheral assignment|peripheral assignment chapter]] to check

It explains how to activate the IIO interface and, based on examples, how to use it.<br /> …log Converters (DACs) and various types of sensors. It can be used on high speed, high data rates industrial devices. Until recently, it was mostly focused

Bluetooth Low Energy is completely supported at the kernel level in Linux. - a "controller stack" containing the timing critical radio interface like HCI <ref>[https://en.wikipedia.org/wiki/List_of_Bluetooth_protocols#HC

* to control both display interfaces and external displays including their settings (resolution, frequencie, mu …ver''' for display, graphic and composition internal and external hardware peripherals.