搜索结果

…mode, it supports high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s).<br> In Peripheral mode, high-speed and full-speed are supported, not low-speed.<br>

…high-speed (480 Mbit/s) using an '''EHCI''' controller, and full- and low- speeds (12 and 1.5 Mbit/s) through '''OHCI''' controller. <br> …terface, mapped on an on-chip 2-port '''[[USBPHYC internal peripheral|high-speed UTMI+ PHY]]'''. <br>

…tains a dual port USB high-speed UTMI+ PHY and a UTMI switch. It makes the interface between: * controls a two port high-speed PHY:

High-speed data communications can be achieved by using the [[DMA internal peripheral] {{:Internal_peripherals_software_table_template}}

SDMMC1/2/3 instances are either '''non-secure''' or '''secure''' peripherals (under [[ETZPC_internal_peripheral|ETZPC]] control). {{:Internal_peripherals_software_table_template}}

It explains how to activate the IIO interface and, based on examples, how to use it.<br /> …verters (DACs) and various types of sensors. It can be used on high speed, high data rates industrial devices. Until recently, it was mostly focused on use

- a "controller stack" containing the timing critical radio interface like HCI <ref>[https://en.wikipedia.org/wiki/List_of_Bluetooth_protocols#HC - a "host stack" dealing with high level data like L2CAP <ref>[https://en.wikipedia.org/wiki/List_of_Bluetooth