“V4L2 camera overview”的版本间的差异

来自百问网嵌入式Linux wiki
 
（未显示同一用户的1个中间版本）
第1行： 第1行：
−
本文提供有关Linux V4L2摄像机框架的信息。
+
{{DISPLAYTITLE:V4L2摄像头概述}}
  
−
=V4l2简介=
+
=V4L2摄像头概述=
−
:V4L2 Linux内核框架[1 ]允许控制外部摄像机传感器和摄像机接口，以便捕获各种像素格式的原始帧或诸如JPEG的编码流数据。
+
==框架目的==
−
:在其他Linux多媒体框架和应用程序的帮助下，通常可以使用它来拍摄快照，进行预览，进行视频录制甚至从相机传感器远程传输图像。
+
: 本文所要讲述的 V4L2 Linux 内核框架[1 ]允许控制两个相机传感器、可捕获以不同的像素格式或诸如JPEG编码流数据原始帧摄像头接口。
 +
: 在其他的 Linux 多媒体框架和应用程序的支持下，通常可以使用它进行快照、进行预览、进行视频录制，甚至可以从进行远程传输图像。
  
 +
==系统概述==
 +
:: [[File:V4L2_camera_overview_001.png|800px]]
 +
 +
===组件说明===
 +
: 应用程序（用户空间）
 +
:: 任何依赖 V4L2 Linux 内核接口或 libv4l 抽象层的应用程序，GStreamer框架提供了对应的应用程序。
 +
 +
: V4L2 实用程序（用户空间）
 +
:: 一组用于测试，配置和使用整个相机子系统的工具，包括外部相机传感器和相机接口。V4l2-ctl 是最有用的实用程序之一。
 +
 +
: V4L2库（libv4l）（用户空间）
 +
:: V4L2 Linux 内核接口之上的一组库，这些库对内核接口进行了抽象化，以简化操作、保持兼容性或在基于 V4L2 的应用程序和 V4L2 内核接口之间添加一些挂钩。
 +
 +
: yavta（用户空间）
 +
:: Yavta是一种测试工具，它依赖于 V4L2 Linux 的内核接口。
 +
 +
: V4L2内核（内核空间）
 +
:: 该层表示标准的 Linux 内核的 V4L2 框架。
 +
 +
: stm32-dcmi（内核空间）
 +
:: V4L2 DCMI Linux 设备驱动程序处理 DCMI 硬件模块。
 +
 +
: 相机传感器X 驱动程序（内核空间）
 +
:: V4L2 Linux 设备驱动程序处理摄像头传感器X 的外围设备，处理一些 GPIO 以及可能的电源，以打开/关闭摄像头传感器的电源。通过 i2c 总线与摄像机传感器进行通讯。
 +
 +
: DCMI（硬件）
 +
:: 数码相机存储器接口的硬件模块。
 +
 +
: 相机传感器X（硬件）
 +
:: 相机传感器的外围设备。
 +
 +
===API描述===
 +
: 在 Linux Media 子系统文档[2 ]中描述了 V4L2 用户态 API
 +
: Linux内核文档[3 ]的 “V4L2内核支持” 部分介绍了 V4L2 内核框架的内部API。
 +
 +
==配置==
 +
===内核配置===
 +
: STMicroelectronics 默认启用STM32相机接口和OV5640相机传感器。
 +
: 但是，使用上游的内核版本时并非如此。在这种情况下，可以使用 [https://wiki.st.com/stm32mpu/wiki/Menuconfig_or_how_to_configure_kernel Linux内核menuconfig工具] 启用 DCMI V4L2 驱动程序：
 +
<syntaxhighlight lang="bash">
 +
[*] Device Drivers --->
 +
    [*] Multimedia support --->
 +
        [*] V4L platform devices  --->
 +
            [*] STM32 Digital Camera Memory Interface (DCMI) support
 +
</syntaxhighlight>
 +
 +
: 还必须启用连接到摄像头接口的外部摄像头传感器，这是基于 OV5640 Omnivision 摄像头传感器的示例，该传感器位于 MB1379 摄像子板[4 ]上，该子板[4 ]连接到 STM32MP15 评估板[6 ]的 CN7 摄像头连接器[5 ]。：
 +
<syntaxhighlight lang="bash">
 +
[*] Device Drivers --->
 +
    [*] Multimedia support --->
 +
        I2C Encoders, decoders, sensors and other helper chips  --->
 +
            [*] OmniVision OV5640 sensor support
 +
</syntaxhighlight>
 +
===设备树配置===
 +
: [https://wiki.st.com/stm32mpu/wiki/DCMI_device_tree_configuration ] 借助 Linux 内核的设备树机制，请参阅 [https://wiki.st.com/stm32mpu/wiki/DCMI_device_tree_configuration DCMI设备树配置] 文章以获取 DCMI 和传感器配置的完整资料。
 +
 +
==如何使用框架==
 +
: 可使用 [https://wiki.st.com/stm32mpu/wiki/V4l2-ctl V4l2-ctl]，[https://gstreamer.freedesktop.org/documentation/tools/gst-launch.html# gst-launch] 或 [https://wiki.st.com/stm32mpu/wiki/Gst-play gst-play] 一个实用的命令行程序启用此处描述的用例。
 +
===列出视频设备及其功能===
 +
: 使用 {{redtext|--list-devices}} 选项列出所有可用的视频设备：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --list-devices
 +
</syntaxhighlight>
 +
<syntaxhighlight lang="bash">
 +
STM32 Camera Memory Interface (platform:dcmi):
 +
        /dev/video0
 +
</syntaxhighlight>
 +
 +
: 如果有多个设备可用，请在任何 V4l2-ctl 命令之后使用 -d 选项来定位特定设备。如果未指定 -d 选项，则默认选择 /dev/video0 。
 +
 +
: 为了获得有关特定设备的信息，请使用 -D 选项：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl -d /dev/video0 -D
 +
</syntaxhighlight>
 +
<syntaxhighlight lang="bash">
 +
Driver Info (not using libv4l2):
 +
        Driver name  : stm32-dcmi
 +
        Card type    : STM32 Camera Memory Interface
 +
        Bus info      : platform:dcmi
 +
        Driver version: X.Y.Z
 +
        Capabilities  : 0x85200001
 +
                Video Capture
 +
                Read/Write
 +
                Streaming
 +
                Extended Pix Format
 +
                Device Capabilities
 +
        Device Caps  : 0x05200001
 +
                Video Capture
 +
                Read/Write
 +
                Streaming
 +
                Extended Pix Format
 +
</syntaxhighlight>
 +
 +
===控制相机===
 +
: 将 [https://wiki.st.com/stm32mpu/wiki/V4l2-ctl V4l2-ctl] 与 {{redtext|-L}} 选项一起使用，以获取受支持的控件的列表：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl -L
 +
</syntaxhighlight>
 +
 +
<syntaxhighlight lang="bash">
 +
User Controls
 +
 +
                      contrast (int)    : min=0 max=255 step=1 default=0 value=0 flags=slider
 +
                    saturation (int)    : min=0 max=255 step=1 default=64 value=64 flags=slider
 +
                            hue (int)    : min=0 max=359 step=1 default=0 value=0 flags=slider
 +
        white_balance_automatic (bool)  : default=1 value=1 flags=update
 +
                    red_balance (int)    : min=0 max=4095 step=1 default=0 value=128 flags=inactive, slider
 +
                  blue_balance (int)    : min=0 max=4095 step=1 default=0 value=128 flags=inactive, slider
 +
                      exposure (int)    : min=0 max=65535 step=1 default=0 value=885 flags=inactive, volatile
 +
                gain_automatic (bool)  : default=1 value=1 flags=update
 +
                          gain (int)    : min=0 max=1023 step=1 default=0 value=32 flags=inactive, volatile
 +
                horizontal_flip (bool)  : default=0 value=0
 +
                  vertical_flip (bool)  : default=0 value=0
 +
 +
Camera Controls
 +
 +
                  auto_exposure (menu)  : min=0 max=1 default=0 value=0 flags=update
 +
                                0: Auto Mode
 +
                                1: Manual Mode
 +
 +
Image Processing Controls
 +
 +
                  test_pattern (menu)  : min=0 max=1 default=0 value=0
 +
                                0: Disabled
 +
                                1: Color bars
 +
</syntaxhighlight>
 +
 +
: 注意："value=" 字段返回控件的当前值
 +
: 可以通过 {{redtext|--set-ctrl}} 选项更改控制值，例如：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-ctrl test_pattern=1
 +
</syntaxhighlight>
 +
: 控制值可以动态更改。在以下示例中，在运行预览时启用/禁用颜色栏：
 +
 +
: 在后台开始预览
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-launch-1.0 v4l2src ! "video/x-raw, width=1280, Height=720, framerate=(fraction)15/1" ! queue ! autovideosink -e &
 +
</syntaxhighlight>
 +
 +
: 然后交替激活颜色栏
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-ctrl test_pattern=1;sleep 1;v4l2-ctl --set-ctrl test_pattern=0;sleep 1;v4l2-ctl --set-ctrl test_pattern=1;sleep 1;v4l2-ctl --set-ctrl test_pattern=0;killall gst-launch-1.0
 +
</syntaxhighlight>
 +
: 预览运行时还可以更改水平/垂直翻转：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-ctrl horizontal_flip=1;sleep 2;v4l2-ctl --set-ctrl horizontal_flip=0;sleep 2;v4l2-ctl --set-ctrl vertical_flip=1;sleep 2;v4l2-ctl --set-ctrl vertical_flip=0;killall gst-launch-1.0
 +
</syntaxhighlight>
 +
 +
===设置像素格式，分辨率和帧率===
 +
: 使用 {{redtext|--list-formats-ext}} 选项可获取受支持的像素格式、分辨率和帧速率：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --list-formats-ext
 +
</syntaxhighlight>
 +
<syntaxhighlight lang="bash">
 +
ioctl: VIDIOC_ENUM_FMT
 +
        Index      : 0
 +
        Type        : Video Capture
 +
        Pixel Format: 'JPEG' (compressed)
 +
        Name        : JFIF JPEG
 +
                Size: Discrete 176x144
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 320x240
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 640x480
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 720x480
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 720x576
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1024x768
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1280x720
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1920x1080
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 2592x1944
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
 +
        Index      : 1
 +
        Type        : Video Capture
 +
        Pixel Format: 'UYVY'
 +
        Name        : UYVY 4:2:2
 +
                Size: Discrete 176x144
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 320x240
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 640x480
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 720x480
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 720x576
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1024x768
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1280x720
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1920x1080
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 2592x1944
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
 +
        Index      : 2
 +
        Type        : Video Capture
 +
        Pixel Format: 'YUYV'
 +
        Name        : YUYV 4:2:2
 +
                Size: Discrete 176x144
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 320x240
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 640x480
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 720x480
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 720x576
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1024x768
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1280x720
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1920x1080
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 2592x1944
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
 +
        Index      : 3
 +
        Type        : Video Capture
 +
        Pixel Format: 'RGBP'
 +
        Name        : 16-bit RGB 5-6-5
 +
                Size: Discrete 176x144
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 320x240
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 640x480
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 720x480
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 720x576
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1024x768
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1280x720
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 1920x1080
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
                        Interval: Discrete 0.033s (30.000 fps)
 +
                Size: Discrete 2592x1944
 +
                        Interval: Discrete 0.067s (15.000 fps)
 +
</syntaxhighlight>
 +
 +
: 为了更改摄像机的配置，请首先使用 --set-parm 选项选择帧速率：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-parm=30
 +
</syntaxhighlight>
 +
: 然后使用 --set-fmt-video 选项选择所需的分辨率和像素格式：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-fmt-video=width=320,height=240,pixelformat=RGBP
 +
</syntaxhighlight>
 +
===设置帧率===
 +
: 对于 V4l2-ctl，请使用 --set-parm 选项仅给出的帧速率分子，分母固定为1（仅允许整数帧速率值）：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-parm=<framerate numerator>
 +
</syntaxhighlight>
 +
 +
: 以 30fps 的速度拍摄 100 张 VGA 图片：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-parm=30;v4l2-ctl --set-fmt-video=width=640,height=480,pixelformat=JPEG --stream-mmap --stream-count=100 --stream-to=pics@30fps.jpeg
 +
</syntaxhighlight>
 +
 +
: 使用 gst-play 以 30fps 的速度重播：
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-play-1.0 pics@30fps.jpeg --videosink="videorate ! video/x-raw, framerate=(fraction)30/1 ! autovideosink"
 +
</syntaxhighlight>
 +
 +
: 以 15fps 的速度拍摄 100 张 VGA 图片：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-parm=15;v4l2-ctl --set-fmt-video=width=640,height=480,pixelformat=JPEG --stream-mmap --stream-count=100 --stream-to=pics@15fps.jpeg
 +
</syntaxhighlight>
 +
 +
: 使用 gst-play 以 15fps 的速度重播：
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-play-1.0 pics@15fps.jpeg --videosink="videorate ! video/x-raw, framerate=(fraction)15/1 ! autovideosink"
 +
</syntaxhighlight>
 +
 +
: 对于 GStreamer，使用帧速率的上限：
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-launch-1.0 v4l2src ! "video/x-raw, ... framerate=(fraction)<numerator>/<denominator>" ! ...
 +
</syntaxhighlight>
 +
 +
: 预览 VGA@30fps
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-launch-1.0 v4l2src ! "video/x-raw, width=640, Height=480, framerate=(fraction)30/1" ! queue ! autovideosink -e
 +
</syntaxhighlight>
 +
 +
: 预览 VGA@15fps
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-launch-1.0 v4l2src ! "video/x-raw, width=640, Height=480, framerate=(fraction)15/1" ! queue ! autovideosink -e
 +
</syntaxhighlight>
 +
 +
===抓取原始帧===
 +
: 在磁盘上捕获 QVGA RGB565 原始帧：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-fmt-video=width=320,height=240,pixelformat=RGBP --stream-mmap --stream-count=1 --stream-to=grab-320x240-rgb565.raw
 +
</syntaxhighlight>
 +
 +
: 必须首先将此原始帧转换为 JPEG 然后才能将其显示出来，：
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-launch-1.0 filesrc location= grab-320x240-rgb565.raw blocksize=153600 ! "video/x-raw, format=(string)RGB16, width=(int)320, height=(int)240, framerate=(fraction)30/1" ! videoconvert ! jpegenc ! filesink location=grab-320x240-rgb565.jpeg
 +
</syntaxhighlight>
 +
 +
: 之后，可以使用 weston-image 命令显示 JPEG 文件：
 +
<syntaxhighlight lang="bash">
 +
Board $> weston-image grab-320x240-rgb565.jpeg
 +
</syntaxhighlight>
 +
 +
===全屏预览===
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-launch-1.0 v4l2src ! "video/x-raw, width=1280, Height=720, framerate=(fraction)15/1" ! queue ! autovideosink -e
 +
</syntaxhighlight>
 +
 +
:: 注意：请注意，GStreamer会覆盖以前可能在视频设备上设置的所有参数（例如，通过 V4l2-ctl 命令设置的参数，例如分辨率，像素格式，帧速率等）
 +
===拍照===
 +
: 捕获 5Mp JPEG：
 +
<syntaxhighlight lang="bash">
 +
Board $> v4l2-ctl --set-parm=15; v4l2-ctl --set-fmt-video=width=2592,height=1944,pixelformat=JPEG --stream-mmap --stream-count=1 --stream-skip=3 --stream-to=pic-5Mp.jpeg; v4l2-ctl --set-parm=30
 +
</syntaxhighlight>
 +
 +
: 然后显示它：
 +
<syntaxhighlight lang="bash">
 +
Board $> weston-image pic-5Mp.jpeg
 +
</syntaxhighlight>
 +
 +
: 现在可以使用 gst-typefind 命令检查图片分辨率：
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-typefind-1.0 pic-5Mp.jpeg
 +
</syntaxhighlight>
 +
<syntaxhighlight lang="bash">
 +
pic-5Mp.jpeg - image/jpeg, width=(int)2592, height=(int)1944, sof-marker=(int)0
 +
</syntaxhighlight>0
 +
===通过网络传输图片===
 +
: 请参阅 [https://wiki.st.com/stm32mpu/wiki/How_to_stream_camera_over_network 如何通过网络传输图片文件] 文章，以获取有关如何通过网络流式传输摄像头内容的一些示例参考。
 +
 +
==如何跟踪和调试==
 +
===如何监视===
 +
====检查 devicetree 配置====
 +
: 下面的命令用于检查是否已启用 DCMI，检查使用了哪个摄像头传感器并记录有关其 devicetree 设置的其他详细信息：
 +
<syntaxhighlight lang="bash">
 +
rm devicetree.txt
 +
echo "[devicetree]" >> devicetree.txt
 +
echo "|-[dcmi]" >> devicetree.txt
 +
find /proc/device-tree/soc | grep dcmi | sed 's/\/proc\/device-tree\/soc\//| |-/' >> devicetree.txt
 +
echo "|" >> devicetree.txt
 +
echo "|-[camera:" | tr -d "\n" >> devicetree.txt
 +
cat /proc/device-tree/soc/i2c*/camera*/compatible >> devicetree.txt
 +
echo "]" >> devicetree.txt
 +
find /proc/device-tree/soc | grep camera | sed 's/\/proc\/device-tree\/soc\//  |-/' >> devicetree.txt
 +
echo "" >> devicetree.txt
 +
cat devicetree.txt
 +
</syntaxhighlight>
 +
<syntaxhighlight lang="bash">
 +
[devicetree]
 +
|-[dcmi]
 +
| |-dcmi@4c006000
 +
| |-dcmi@4c006000/compatible
 +
| |-dcmi@4c006000/clocks
 +
| |-dcmi@4c006000/resets
 +
| |-dcmi@4c006000/pinctrl-1
 +
| |-dcmi@4c006000/port
 +
| |-dcmi@4c006000/port/endpoint
 +
| |-dcmi@4c006000/port/endpoint/hsync-active
 +
| |-dcmi@4c006000/port/endpoint/vsync-active
 +
| |-dcmi@4c006000/port/endpoint/remote-endpoint
 +
| |-dcmi@4c006000/port/endpoint/bus-width
 +
| |-dcmi@4c006000/port/endpoint/pclk-sample
 +
| |-dcmi@4c006000/port/endpoint/phandle
 +
| |-dcmi@4c006000/port/endpoint/linux,phandle
 +
| |-dcmi@4c006000/port/endpoint/name
 +
| |-dcmi@4c006000/port/name
 +
| |-dcmi@4c006000/clock-names
 +
| |-dcmi@4c006000/status
 +
| |-dcmi@4c006000/interrupts
 +
| |-dcmi@4c006000/dma-names
 +
| |-dcmi@4c006000/phandle
 +
| |-dcmi@4c006000/reg
 +
| |-dcmi@4c006000/pinctrl-0
 +
| |-dcmi@4c006000/dmas
 +
| |-dcmi@4c006000/linux,phandle
 +
| |-dcmi@4c006000/name
 +
| |-dcmi@4c006000/pinctrl-names
 +
| |-pin-controller/dcmi-sleep@0
 +
| |-pin-controller/dcmi-sleep@0/pins
 +
| |-pin-controller/dcmi-sleep@0/pins/pinmux
 +
| |-pin-controller/dcmi-sleep@0/pins/name
 +
| |-pin-controller/dcmi-sleep@0/phandle
 +
| |-pin-controller/dcmi-sleep@0/linux,phandle
 +
| |-pin-controller/dcmi-sleep@0/name
 +
| |-pin-controller/dcmi@0
 +
| |-pin-controller/dcmi@0/pins
 +
| |-pin-controller/dcmi@0/pins/pinmux
 +
| |-pin-controller/dcmi@0/pins/bias-disable
 +
| |-pin-controller/dcmi@0/pins/name
 +
| |-pin-controller/dcmi@0/phandle
 +
| |-pin-controller/dcmi@0/linux,phandle
 +
| |-pin-controller/dcmi@0/name
 +
|
 +
|-[camera:ovti,ov5640]
 +
  |-i2c@40013000/camera@3c
 +
  |-i2c@40013000/camera@3c/compatible
 +
  |-i2c@40013000/camera@3c/powerdown-gpios
 +
  |-i2c@40013000/camera@3c/DOVDD-supply
 +
  |-i2c@40013000/camera@3c/clocks
 +
  |-i2c@40013000/camera@3c/rotation
 +
  |-i2c@40013000/camera@3c/port
 +
  |-i2c@40013000/camera@3c/port/endpoint
 +
  |-i2c@40013000/camera@3c/port/endpoint/hsync-active
 +
  |-i2c@40013000/camera@3c/port/endpoint/vsync-active
 +
  |-i2c@40013000/camera@3c/port/endpoint/remote-endpoint
 +
  |-i2c@40013000/camera@3c/port/endpoint/bus-width
 +
  |-i2c@40013000/camera@3c/port/endpoint/pclk-sample
 +
  |-i2c@40013000/camera@3c/port/endpoint/phandle
 +
  |-i2c@40013000/camera@3c/port/endpoint/data-shift
 +
  |-i2c@40013000/camera@3c/port/endpoint/linux,phandle
 +
  |-i2c@40013000/camera@3c/port/endpoint/name
 +
  |-i2c@40013000/camera@3c/port/name
 +
  |-i2c@40013000/camera@3c/clock-names
 +
  |-i2c@40013000/camera@3c/status
 +
  |-i2c@40013000/camera@3c/reset-gpios
 +
  |-i2c@40013000/camera@3c/phandle
 +
  |-i2c@40013000/camera@3c/reg
 +
  |-i2c@40013000/camera@3c/linux,phandle
 +
  |-i2c@40013000/camera@3c/name
 +
</syntaxhighlight>
 +
 +
===如何追踪===
 +
====V4L2 用户界面 API 的工作过程====
 +
: 可以使用下面的命令启用对 V4L2 用户态 API [2 ]的跟踪：
 +
<syntaxhighlight lang="bash">
 +
Board $> echo 0x3 >  /sys/devices/platform/soc/*.dcmi/video4linux/video*/dev_debug
 +
</syntaxhighlight>
 +
: 跟踪在内核日志缓冲区中的输出：
 +
<syntaxhighlight lang="bash">
 +
Board $> dmesg
 +
</syntaxhighlight>
 +
<syntaxhighlight lang="bash">
 +
[10130.641469] video0: VIDIOC_TRY_FMT: type=vid-cap, width=640, height=480, pixelformat=YUYV, field=none, bytesperline=
 +
1280, sizeimage=614400, colorspace=8, flags=0x0, ycbcr_enc=1, quantization=1, xfer_func=2
 +
[10130.641550] video0: VIDIOC_S_FMT: type=vid-cap, width=640, height=480, pixelformat=YUYV, field=none, bytesperline=12
 +
80, sizeimage=614400, colorspace=8, flags=0x0, ycbcr_enc=1, quantization=1, xfer_func=2
 +
[10130.641597] video0: VIDIOC_G_PARM: type=vid-cap, capability=0x1000, capturemode=0x0, timeperframe=1/30, extendedmode
 +
=0, readbuffers=2
 +
[10130.641638] video0: VIDIOC_G_PARM: type=vid-cap, capability=0x1000, capturemode=0x0, timeperframe=1/30, extendedmode
 +
=0, readbuffers=2
 +
[10130.641681] video0: VIDIOC_S_PARM: type=vid-cap, capability=0x1000, capturemode=0x0, timeperframe=1/30, extendedmode
 +
=0, readbuffers=2
 +
[10130.641740] video0: VIDIOC_G_CTRL: error -22: id=0x980927, value=0
 +
[10130.642770] video0: VIDIOC_REQBUFS: count=0, type=vid-cap, memory=mmap
 +
[10130.642819] video0: VIDIOC_CREATE_BUFS: index=0, count=0, memory=mmap, type=vid-cap, width=640, height=480, pixelfor
 +
mat=YUYV, field=none, bytesperline=1280, sizeimage=614400, colorspace=8, flags=0x0, ycbcr_enc=1, quantization=1, xfer_f
 +
unc=2
 +
[10130.658541] video0: VIDIOC_G_CTRL: error -22: id=0x980927, value=0
 +
[10130.662770] video0: VIDIOC_REQBUFS: count=3, type=vid-cap, memory=mmap
 +
[10130.662852] video0: VIDIOC_QUERYBUF: 00:00:00.00000000 index=0, type=vid-cap, flags=0x00002000, field=any, sequence=
 +
0, memory=mmap, bytesused=0, offset/userptr=0x0, length=614400
 +
[10130.662892] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000
 +
[10130.662917] video0: VIDIOC_QUERYBUF: 00:00:00.00000000 index=1, type=vid-cap, flags=0x00002000, field=any, sequence=
 +
0, memory=mmap, bytesused=0, offset/userptr=0x96000, length=614400
 +
[10130.662952] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000
 +
[10130.662967] video0: VIDIOC_QUERYBUF: 00:00:00.00000000 index=2, type=vid-cap, flags=0x00002000, field=any, sequence=
 +
0, memory=mmap, bytesused=0, offset/userptr=0x12c000, length=614400
 +
[10130.663002] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000
 +
[10130.666880] video0: VIDIOC_STREAMON: type=vid-cap
 +
[10130.857484] video0: VIDIOC_CREATE_BUFS: index=3, count=1, memory=mmap, type=vid-cap, width=640, height=480, pixelfor
 +
mat=YUYV, field=none, bytesperline=1280, sizeimage=614400, colorspace=8, flags=0x0, ycbcr_enc=1, quantization=1, xfer_f
 +
unc=2
 +
[10130.857585] video0: VIDIOC_QUERYBUF: 00:00:00.00000000 index=3, type=vid-cap, flags=0x00002000, field=any, sequence=
 +
0, memory=mmap, bytesused=0, offset/userptr=0x1c2000, length=614400
 +
[10130.857627] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000
 +
[10131.022069] video0: VIDIOC_STREAMOFF: type=vid-cap
 +
</syntaxhighlight>
 +
====V4L2核心框架跟踪====
 +
: 可以使用以下命令来启用 V4L2 核心框架[3 ]的跟踪：
 +
<syntaxhighlight lang="bash">
 +
Board $> echo 0x3 > /sys/module/videobuf2_core/parameters/debug
 +
Board $> echo 0x3 > /sys/module/videobuf2_v4l2/parameters/debug
 +
</syntaxhighlight>
 +
: 跟踪在内核日志缓冲区中的输出：
 +
<syntaxhighlight lang="bash">
 +
Board $> dmesg
 +
</syntaxhighlight>
 +
<syntaxhighlight lang="bash">
 +
[11875.487933] vb2-core: __setup_offsets: buffer 0, plane 0 offset 0x00000000
 +
[11875.501731] vb2-core: __setup_offsets: buffer 1, plane 0 offset 0x001fb000
 +
[11875.514901] vb2-core: __setup_offsets: buffer 2, plane 0 offset 0x003f6000
 +
[11875.532298] vb2-core: __setup_offsets: buffer 3, plane 0 offset 0x005f1000
 +
[11875.540019] vb2-core: __vb2_queue_alloc: allocated 4 buffers, 1 plane(s) each
 +
[11875.563689] vb2_dc_mmap: mapped dma addr 0xf1900000 at 0xb4f05000, size 2076672
 +
[11875.571174] vb2-core: vb2_mmap: buffer 0, plane 0 successfully mapped
 +
[11875.589656] vb2-core: vb2_core_qbuf: qbuf of buffer 0 succeeded
 +
[11875.595684] vb2_dc_mmap: mapped dma addr 0xf1b00000 at 0xb4d0a000, size 2076672
 +
[11875.603062] vb2-core: vb2_mmap: buffer 1, plane 0 successfully mapped
 +
[11875.609668] vb2-core: vb2_core_qbuf: qbuf of buffer 1 succeeded
 +
[11875.615642] vb2_dc_mmap: mapped dma addr 0xf1d00000 at 0xb4b0f000, size 2076672
 +
[11875.623016] vb2-core: vb2_mmap: buffer 2, plane 0 successfully mapped
 +
[11875.629628] vb2-core: vb2_core_qbuf: qbuf of buffer 2 succeeded
 +
[11875.635617] vb2_dc_mmap: mapped dma addr 0xf1f00000 at 0xb4914000, size 2076672
 +
[11875.642952] vb2-core: vb2_mmap: buffer 3, plane 0 successfully mapped
 +
[11875.649715] vb2-core: vb2_core_qbuf: qbuf of buffer 3 succeeded
 +
[11875.734058] vb2-core: vb2_core_streamon: successful
 +
[11875.961291] vb2-core: vb2_buffer_done: done processing on buffer 0, state: 6
 +
[11875.967036] vb2-core: vb2_core_dqbuf: returning done buffer
 +
[11875.972437] vb2-core: vb2_core_dqbuf: dqbuf of buffer 0, with state 0
 +
[11876.094639] vb2-core: vb2_buffer_done: done processing on buffer 1, state: 6
 +
[11876.100367] vb2-core: vb2_core_dqbuf: returning done buffer
 +
[11876.105788] vb2-core: vb2_core_dqbuf: dqbuf of buffer 1, with state 0
 +
</syntaxhighlight>
 +
====DCMI V4L2 内核驱动程序跟踪====
 +
: 可以使用下面的命令启用 DCMI 的动态调试跟踪[7 ]：
 +
<syntaxhighlight lang="bash">
 +
Board $> echo "module stm32_dcmi +p" > /sys/kernel/debug/dynamic_debug/control
 +
</syntaxhighlight>
 +
: 这是一个 5Mp jpeg 捕获的示例：
 +
<syntaxhighlight lang="bash">
 +
Board $> gst-launch-1.0 v4l2src ! image/jpeg, width=2592, height=1944 ! fakesink
 +
Board $> dmesg
 +
</syntaxhighlight>
 +
<syntaxhighlight lang="bash">
 +
[12706.715949] stm32-dcmi 4c006000.dcmi: Sensor format set to 0x4001 2592x1944
 +
[12706.721548] stm32-dcmi 4c006000.dcmi: Buffer format set to JPEG 2592x1944
 +
[12707.365947] stm32-dcmi 4c006000.dcmi: Sensor format set to 0x4001 2592x1944
 +
[12707.371551] stm32-dcmi 4c006000.dcmi: Buffer format set to JPEG 2592x1944
 +
[12707.437537] stm32-dcmi 4c006000.dcmi: Sensor format set to 0x4001 2592x1944
 +
[12707.443042] stm32-dcmi 4c006000.dcmi: Buffer format set to JPEG 2592x1944
 +
[12707.459767] stm32-dcmi 4c006000.dcmi: Setup queue, count=4, size=5038848
 +
[12707.518914] stm32-dcmi 4c006000.dcmi: buffer[0] phy=0xf1900000 size=5038848
 +
[12707.526068] stm32-dcmi 4c006000.dcmi: buffer[1] phy=0xf1e00000 size=5038848
 +
[12707.533299] stm32-dcmi 4c006000.dcmi: buffer[2] phy=0xf2300000 size=5038848
 +
[12707.541456] stm32-dcmi 4c006000.dcmi: buffer[3] phy=0xf2800000 size=5038848
 +
[12707.551443] stm32-dcmi 4c006000.dcmi: Start streaming, starting capture
 +
[12707.820885] stm32-dcmi 4c006000.dcmi: buffer[0] done seq=0, bytesused=499936
 +
[12708.087436] stm32-dcmi 4c006000.dcmi: buffer[1] done seq=1, bytesused=447472
 +
[12708.306415] stm32-dcmi 4c006000.dcmi: Stop streaming, errors=0 (overrun=0), buffers=2
 +
[12708.319095] stm32-dcmi 4c006000.dcmi: Start streaming, starting capture
 +
[12708.333571] stm32-dcmi 4c006000.dcmi: Stop streaming, errors=0 (overrun=0), buffers=0
 +
</syntaxhighlight>
 +
===如何调试===
 +
====错误====
 +
: 在内核日志中无条件地跟踪错误：
 +
<syntaxhighlight lang="bash">
 +
Board $> dmesg
 +
[  87.233672] stm32-dcmi 4c006000.dcmi: Some errors found while streaming: errors=1 (overrun=1), buffers=24
 +
</syntaxhighlight>
 +
 +
====内存跟踪====
 +
: 帧需要大块连续内存，它们由 V4L2 框架通过 DMA 分配。可以使用以下方法跟踪这些分配：
 +
<syntaxhighlight lang="bash">
 +
Board $> echo "module dma_contiguous +p" > /sys/kernel/debug/dynamic_debug/control
 +
Board $> echo "module videobuf2_dma_contig +p" > /sys/kernel/debug/dynamic_debug/control
 +
</syntaxhighlight>
 +
 +
: VGA 预览后的轨迹
 +
<syntaxhighlight lang="bash">
 +
[11311.617688] vb2_dc_mmap: mapped dma addr 0xf1900000 at 0xb3b6a000, size 614400
 +
[11311.617986] vb2_dc_mmap: mapped dma addr 0xf1a00000 at 0xb3ad4000, size 614400
 +
[11311.618071] vb2_dc_mmap: mapped dma addr 0xf1b00000 at 0xb3a3e000, size 614400
 +
[11311.764146] vb2_dc_mmap: mapped dma addr 0xf1c00000 at 0xb307c000, size 614400
 +
</syntaxhighlight>
 +
: 4 帧VGA YUV422帧：640x480x2=614400字节
 +
 +
==源代码位置==
 +
===用户空间===
 +
* [https://git.linuxtv.org/v4l-utils.git V4L2 实用程序源代码]
 +
* [https://git.linuxtv.org/v4l-utils.git V4L2 库源代码]
 +
* [http://git.ideasonboard.org/yavta.git Yavta 源代码]
 +
===内核空间===
 +
* [https://github.com/STMicroelectronics/linux/blob/v4.19-stm32mp/drivers/media/v4l2-core V4L2 核心源代码]
 +
* [https://github.com/STMicroelectronics/linux/blob/v4.19-stm32mp/drivers/media/platform/stm32/stm32-dcmi.c stm32-dcmi V4L2 驱动程序源代码]
 +
* [https://github.com/STMicroelectronics/linux/blob/v4.19-stm32mp/drivers/media/i2c i2c 相机传感器 V4L2 驱动程序源代码]
 +
==参考==
 +
# [https://en.wikipedia.org/wiki/Video4Linux 维基百科上有关 V4L2 Linux 内核框架的信息]
 +
# [https://www.linuxtv.org/downloads/v4l-dvb-apis-new/uapi/v4l/v4l2.html Linux Media基础结构用户空间 API >> 第一部分-Linux API视频]
 +
# [https://www.kernel.org/doc/html/latest/media/kapi/v4l2-core.html 媒体子系统内核内部 API >> 1. Video4Linux设备]
 +
# [https://wiki.st.com/stm32mpu/wiki/MB1379 MB1379相机子板]
 +
# [https://wiki.st.com/stm32mpu/wiki/STM32MP157C-EV1_-_hardware_description#MB1262-CN7 STM32MP157C-EV1评估板 CN7 摄像机传感器连接器]
 +
# [https://wiki.st.com/stm32mpu/wiki/STM32MP157C-EV1_-_hardware_description STM32MP15 评估板]
 +
# [https://wiki.st.com/stm32mpu/wiki/How_to_use_the_kernel_dynamic_debug 如何使用内核动态调试]
  
  

2020年1月6日 (一) 15:44的最新版本


V4L2摄像头概述

框架目的

本文所要讲述的 V4L2 Linux 内核框架[1 ]允许控制两个相机传感器、可捕获以不同的像素格式或诸如JPEG编码流数据原始帧摄像头接口。
在其他的 Linux 多媒体框架和应用程序的支持下，通常可以使用它进行快照、进行预览、进行视频录制，甚至可以从进行远程传输图像。

系统概述

800px

组件说明

应用程序（用户空间）
任何依赖 V4L2 Linux 内核接口或 libv4l 抽象层的应用程序，GStreamer框架提供了对应的应用程序。
V4L2 实用程序（用户空间）
一组用于测试，配置和使用整个相机子系统的工具，包括外部相机传感器和相机接口。V4l2-ctl 是最有用的实用程序之一。
V4L2库（libv4l）（用户空间）
V4L2 Linux 内核接口之上的一组库，这些库对内核接口进行了抽象化，以简化操作、保持兼容性或在基于 V4L2 的应用程序和 V4L2 内核接口之间添加一些挂钩。
yavta（用户空间）
Yavta是一种测试工具，它依赖于 V4L2 Linux 的内核接口。
V4L2内核（内核空间）
该层表示标准的 Linux 内核的 V4L2 框架。
stm32-dcmi（内核空间）
V4L2 DCMI Linux 设备驱动程序处理 DCMI 硬件模块。
相机传感器X 驱动程序（内核空间）
V4L2 Linux 设备驱动程序处理摄像头传感器X 的外围设备，处理一些 GPIO 以及可能的电源，以打开/关闭摄像头传感器的电源。通过 i2c 总线与摄像机传感器进行通讯。
DCMI（硬件）
数码相机存储器接口的硬件模块。
相机传感器X（硬件）
相机传感器的外围设备。

API描述

在 Linux Media 子系统文档[2 ]中描述了 V4L2 用户态 API
Linux内核文档[3 ]的 “V4L2内核支持” 部分介绍了 V4L2 内核框架的内部API。

配置

内核配置

STMicroelectronics 默认启用STM32相机接口和OV5640相机传感器。
但是，使用上游的内核版本时并非如此。在这种情况下，可以使用 Linux内核menuconfig工具 启用 DCMI V4L2 驱动程序：
	[*] Device Drivers --->
	    [*] Multimedia support --->
	        [*] V4L platform devices  ---> 
	            [*] STM32 Digital Camera Memory Interface (DCMI) support
还必须启用连接到摄像头接口的外部摄像头传感器，这是基于 OV5640 Omnivision 摄像头传感器的示例，该传感器位于 MB1379 摄像子板[4 ]上，该子板[4 ]连接到 STM32MP15 评估板[6 ]的 CN7 摄像头连接器[5 ]。：
	[*] Device Drivers --->
	    [*] Multimedia support --->
	        I2C Encoders, decoders, sensors and other helper chips  ---> 
	            [*] OmniVision OV5640 sensor support

设备树配置

[1] 借助 Linux 内核的设备树机制，请参阅 DCMI设备树配置 文章以获取 DCMI 和传感器配置的完整资料。

如何使用框架

可使用 V4l2-ctl，gst-launch 或 gst-play 一个实用的命令行程序启用此处描述的用例。

列出视频设备及其功能

使用 --list-devices 选项列出所有可用的视频设备：
	Board $> v4l2-ctl --list-devices

	STM32 Camera Memory Interface (platform:dcmi):
	        /dev/video0
如果有多个设备可用，请在任何 V4l2-ctl 命令之后使用 -d 选项来定位特定设备。如果未指定 -d 选项，则默认选择 /dev/video0 。
为了获得有关特定设备的信息，请使用 -D 选项：
	Board $> v4l2-ctl -d /dev/video0 -D

	Driver Info (not using libv4l2):
	        Driver name   : stm32-dcmi
	        Card type     : STM32 Camera Memory Interface
	        Bus info      : platform:dcmi
	        Driver version: X.Y.Z
	        Capabilities  : 0x85200001
	                Video Capture
	                Read/Write
	                Streaming
	                Extended Pix Format
	                Device Capabilities
	        Device Caps   : 0x05200001
	                Video Capture
	                Read/Write
	                Streaming
	                Extended Pix Format

控制相机

将 V4l2-ctl 与 -L 选项一起使用，以获取受支持的控件的列表：
	Board $> v4l2-ctl -L

	User Controls

	                       contrast (int)    : min=0 max=255 step=1 default=0 value=0 flags=slider
	                     saturation (int)    : min=0 max=255 step=1 default=64 value=64 flags=slider
	                            hue (int)    : min=0 max=359 step=1 default=0 value=0 flags=slider
	        white_balance_automatic (bool)   : default=1 value=1 flags=update
	                    red_balance (int)    : min=0 max=4095 step=1 default=0 value=128 flags=inactive, slider
	                   blue_balance (int)    : min=0 max=4095 step=1 default=0 value=128 flags=inactive, slider
	                       exposure (int)    : min=0 max=65535 step=1 default=0 value=885 flags=inactive, volatile
	                 gain_automatic (bool)   : default=1 value=1 flags=update
	                           gain (int)    : min=0 max=1023 step=1 default=0 value=32 flags=inactive, volatile
	                horizontal_flip (bool)   : default=0 value=0
	                  vertical_flip (bool)   : default=0 value=0

	Camera Controls

	                  auto_exposure (menu)   : min=0 max=1 default=0 value=0 flags=update
	                                0: Auto Mode
	                                1: Manual Mode

	Image Processing Controls

	                   test_pattern (menu)   : min=0 max=1 default=0 value=0
	                                0: Disabled
	                                1: Color bars
注意："value=" 字段返回控件的当前值
可以通过 --set-ctrl 选项更改控制值，例如：
	Board $> v4l2-ctl --set-ctrl test_pattern=1
控制值可以动态更改。在以下示例中，在运行预览时启用/禁用颜色栏：
在后台开始预览
	Board $> gst-launch-1.0 v4l2src ! "video/x-raw, width=1280, Height=720, framerate=(fraction)15/1" ! queue ! autovideosink -e &
然后交替激活颜色栏
	Board $> v4l2-ctl --set-ctrl test_pattern=1;sleep 1;v4l2-ctl --set-ctrl test_pattern=0;sleep 1;v4l2-ctl --set-ctrl test_pattern=1;sleep 1;v4l2-ctl --set-ctrl test_pattern=0;killall gst-launch-1.0
预览运行时还可以更改水平/垂直翻转：
	Board $> v4l2-ctl --set-ctrl horizontal_flip=1;sleep 2;v4l2-ctl --set-ctrl horizontal_flip=0;sleep 2;v4l2-ctl --set-ctrl vertical_flip=1;sleep 2;v4l2-ctl --set-ctrl vertical_flip=0;killall gst-launch-1.0

设置像素格式，分辨率和帧率

使用 --list-formats-ext 选项可获取受支持的像素格式、分辨率和帧速率：
	Board $> v4l2-ctl --list-formats-ext

	ioctl: VIDIOC_ENUM_FMT
	        Index       : 0
	        Type        : Video Capture
	        Pixel Format: 'JPEG' (compressed)
	        Name        : JFIF JPEG
	                Size: Discrete 176x144
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 320x240
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 640x480
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 720x480
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 720x576
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1024x768
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1280x720
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1920x1080
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 2592x1944
	                        Interval: Discrete 0.067s (15.000 fps)

	        Index       : 1
	        Type        : Video Capture
	        Pixel Format: 'UYVY'
	        Name        : UYVY 4:2:2
	                Size: Discrete 176x144
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 320x240
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 640x480
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 720x480
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 720x576
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1024x768
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1280x720
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1920x1080
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 2592x1944
	                        Interval: Discrete 0.067s (15.000 fps)

	        Index       : 2
	        Type        : Video Capture
	        Pixel Format: 'YUYV'
	        Name        : YUYV 4:2:2
	                Size: Discrete 176x144
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 320x240
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 640x480
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 720x480
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 720x576
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1024x768
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1280x720
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1920x1080
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 2592x1944
	                        Interval: Discrete 0.067s (15.000 fps)

	        Index       : 3
	        Type        : Video Capture
	        Pixel Format: 'RGBP'
	        Name        : 16-bit RGB 5-6-5
	                Size: Discrete 176x144
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 320x240
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 640x480
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 720x480
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 720x576
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1024x768
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1280x720
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 1920x1080
	                        Interval: Discrete 0.067s (15.000 fps)
	                        Interval: Discrete 0.033s (30.000 fps)
	                Size: Discrete 2592x1944
	                        Interval: Discrete 0.067s (15.000 fps)
为了更改摄像机的配置，请首先使用 --set-parm 选项选择帧速率：
	Board $> v4l2-ctl --set-parm=30
然后使用 --set-fmt-video 选项选择所需的分辨率和像素格式：
	Board $> v4l2-ctl --set-fmt-video=width=320,height=240,pixelformat=RGBP

设置帧率

对于 V4l2-ctl，请使用 --set-parm 选项仅给出的帧速率分子，分母固定为1（仅允许整数帧速率值）：
	Board $> v4l2-ctl --set-parm=<framerate numerator>
以 30fps 的速度拍摄 100 张 VGA 图片：
	Board $> v4l2-ctl --set-parm=30;v4l2-ctl --set-fmt-video=width=640,height=480,pixelformat=JPEG --stream-mmap --stream-count=100 --stream-to=pics@30fps.jpeg
使用 gst-play 以 30fps 的速度重播：
	Board $> gst-play-1.0 pics@30fps.jpeg --videosink="videorate ! video/x-raw, framerate=(fraction)30/1 ! autovideosink"
以 15fps 的速度拍摄 100 张 VGA 图片：
	Board $> v4l2-ctl --set-parm=15;v4l2-ctl --set-fmt-video=width=640,height=480,pixelformat=JPEG --stream-mmap --stream-count=100 --stream-to=pics@15fps.jpeg
使用 gst-play 以 15fps 的速度重播：
	Board $> gst-play-1.0 pics@15fps.jpeg --videosink="videorate ! video/x-raw, framerate=(fraction)15/1 ! autovideosink"
对于 GStreamer，使用帧速率的上限：
	Board $> gst-launch-1.0 v4l2src ! "video/x-raw, ... framerate=(fraction)<numerator>/<denominator>" ! ...
预览 VGA@30fps
	Board $> gst-launch-1.0 v4l2src ! "video/x-raw, width=640, Height=480, framerate=(fraction)30/1" ! queue ! autovideosink -e
预览 VGA@15fps
	Board $> gst-launch-1.0 v4l2src ! "video/x-raw, width=640, Height=480, framerate=(fraction)15/1" ! queue ! autovideosink -e

抓取原始帧

在磁盘上捕获 QVGA RGB565 原始帧：
	Board $> v4l2-ctl --set-fmt-video=width=320,height=240,pixelformat=RGBP --stream-mmap --stream-count=1 --stream-to=grab-320x240-rgb565.raw
必须首先将此原始帧转换为 JPEG 然后才能将其显示出来，：
	Board $> gst-launch-1.0 filesrc location= grab-320x240-rgb565.raw blocksize=153600 ! "video/x-raw, format=(string)RGB16, width=(int)320, height=(int)240, framerate=(fraction)30/1" ! videoconvert ! jpegenc ! filesink location=grab-320x240-rgb565.jpeg
之后，可以使用 weston-image 命令显示 JPEG 文件：
	Board $> weston-image grab-320x240-rgb565.jpeg

全屏预览 

	Board $> gst-launch-1.0 v4l2src ! "video/x-raw, width=1280, Height=720, framerate=(fraction)15/1" ! queue ! autovideosink -e
注意：请注意，GStreamer会覆盖以前可能在视频设备上设置的所有参数（例如，通过 V4l2-ctl 命令设置的参数，例如分辨率，像素格式，帧速率等）

拍照

捕获 5Mp JPEG：
	Board $> v4l2-ctl --set-parm=15; v4l2-ctl --set-fmt-video=width=2592,height=1944,pixelformat=JPEG --stream-mmap --stream-count=1 --stream-skip=3 --stream-to=pic-5Mp.jpeg; v4l2-ctl --set-parm=30
然后显示它：
	Board $> weston-image pic-5Mp.jpeg
现在可以使用 gst-typefind 命令检查图片分辨率：
	Board $> gst-typefind-1.0 pic-5Mp.jpeg

	pic-5Mp.jpeg - image/jpeg, width=(int)2592, height=(int)1944, sof-marker=(int)0

0

通过网络传输图片

请参阅 如何通过网络传输图片文件 文章，以获取有关如何通过网络流式传输摄像头内容的一些示例参考。

如何跟踪和调试

如何监视

检查 devicetree 配置

下面的命令用于检查是否已启用 DCMI，检查使用了哪个摄像头传感器并记录有关其 devicetree 设置的其他详细信息：
	 rm devicetree.txt
	 echo "[devicetree]" >> devicetree.txt
	 echo "|-[dcmi]" >> devicetree.txt
	 find /proc/device-tree/soc | grep dcmi | sed 's/\/proc\/device-tree\/soc\//| |-/' >> devicetree.txt
	 echo "|" >> devicetree.txt
	 echo "|-[camera:" | tr -d "\n" >> devicetree.txt
	 cat /proc/device-tree/soc/i2c*/camera*/compatible >> devicetree.txt
	 echo "]" >> devicetree.txt
	 find /proc/device-tree/soc | grep camera | sed 's/\/proc\/device-tree\/soc\//  |-/' >> devicetree.txt
	 echo "" >> devicetree.txt
	 cat devicetree.txt

	[devicetree]
	|-[dcmi]
	| |-dcmi@4c006000
	| |-dcmi@4c006000/compatible
	| |-dcmi@4c006000/clocks
	| |-dcmi@4c006000/resets
	| |-dcmi@4c006000/pinctrl-1
	| |-dcmi@4c006000/port
	| |-dcmi@4c006000/port/endpoint
	| |-dcmi@4c006000/port/endpoint/hsync-active
	| |-dcmi@4c006000/port/endpoint/vsync-active
	| |-dcmi@4c006000/port/endpoint/remote-endpoint
	| |-dcmi@4c006000/port/endpoint/bus-width
	| |-dcmi@4c006000/port/endpoint/pclk-sample
	| |-dcmi@4c006000/port/endpoint/phandle
	| |-dcmi@4c006000/port/endpoint/linux,phandle
	| |-dcmi@4c006000/port/endpoint/name
	| |-dcmi@4c006000/port/name
	| |-dcmi@4c006000/clock-names
	| |-dcmi@4c006000/status
	| |-dcmi@4c006000/interrupts
	| |-dcmi@4c006000/dma-names
	| |-dcmi@4c006000/phandle
	| |-dcmi@4c006000/reg
	| |-dcmi@4c006000/pinctrl-0
	| |-dcmi@4c006000/dmas
	| |-dcmi@4c006000/linux,phandle
	| |-dcmi@4c006000/name
	| |-dcmi@4c006000/pinctrl-names
	| |-pin-controller/dcmi-sleep@0
	| |-pin-controller/dcmi-sleep@0/pins
	| |-pin-controller/dcmi-sleep@0/pins/pinmux
	| |-pin-controller/dcmi-sleep@0/pins/name
	| |-pin-controller/dcmi-sleep@0/phandle
	| |-pin-controller/dcmi-sleep@0/linux,phandle
	| |-pin-controller/dcmi-sleep@0/name
	| |-pin-controller/dcmi@0
	| |-pin-controller/dcmi@0/pins
	| |-pin-controller/dcmi@0/pins/pinmux
	| |-pin-controller/dcmi@0/pins/bias-disable
	| |-pin-controller/dcmi@0/pins/name
	| |-pin-controller/dcmi@0/phandle
	| |-pin-controller/dcmi@0/linux,phandle
	| |-pin-controller/dcmi@0/name
	|
	|-[camera:ovti,ov5640]
	  |-i2c@40013000/camera@3c
	  |-i2c@40013000/camera@3c/compatible
	  |-i2c@40013000/camera@3c/powerdown-gpios
	  |-i2c@40013000/camera@3c/DOVDD-supply
	  |-i2c@40013000/camera@3c/clocks
	  |-i2c@40013000/camera@3c/rotation
	  |-i2c@40013000/camera@3c/port
	  |-i2c@40013000/camera@3c/port/endpoint
	  |-i2c@40013000/camera@3c/port/endpoint/hsync-active
	  |-i2c@40013000/camera@3c/port/endpoint/vsync-active
	  |-i2c@40013000/camera@3c/port/endpoint/remote-endpoint
	  |-i2c@40013000/camera@3c/port/endpoint/bus-width
	  |-i2c@40013000/camera@3c/port/endpoint/pclk-sample
	  |-i2c@40013000/camera@3c/port/endpoint/phandle
	  |-i2c@40013000/camera@3c/port/endpoint/data-shift
	  |-i2c@40013000/camera@3c/port/endpoint/linux,phandle
	  |-i2c@40013000/camera@3c/port/endpoint/name
	  |-i2c@40013000/camera@3c/port/name
	  |-i2c@40013000/camera@3c/clock-names
	  |-i2c@40013000/camera@3c/status
	  |-i2c@40013000/camera@3c/reset-gpios
	  |-i2c@40013000/camera@3c/phandle
	  |-i2c@40013000/camera@3c/reg
	  |-i2c@40013000/camera@3c/linux,phandle
	  |-i2c@40013000/camera@3c/name

如何追踪

V4L2 用户界面 API 的工作过程

可以使用下面的命令启用对 V4L2 用户态 API [2 ]的跟踪：
	Board $> echo 0x3 >  /sys/devices/platform/soc/*.dcmi/video4linux/video*/dev_debug
跟踪在内核日志缓冲区中的输出：
	Board $> dmesg

	[10130.641469] video0: VIDIOC_TRY_FMT: type=vid-cap, width=640, height=480, pixelformat=YUYV, field=none, bytesperline=
	1280, sizeimage=614400, colorspace=8, flags=0x0, ycbcr_enc=1, quantization=1, xfer_func=2
	[10130.641550] video0: VIDIOC_S_FMT: type=vid-cap, width=640, height=480, pixelformat=YUYV, field=none, bytesperline=12
	80, sizeimage=614400, colorspace=8, flags=0x0, ycbcr_enc=1, quantization=1, xfer_func=2
	[10130.641597] video0: VIDIOC_G_PARM: type=vid-cap, capability=0x1000, capturemode=0x0, timeperframe=1/30, extendedmode
	=0, readbuffers=2
	[10130.641638] video0: VIDIOC_G_PARM: type=vid-cap, capability=0x1000, capturemode=0x0, timeperframe=1/30, extendedmode
	=0, readbuffers=2
	[10130.641681] video0: VIDIOC_S_PARM: type=vid-cap, capability=0x1000, capturemode=0x0, timeperframe=1/30, extendedmode
	=0, readbuffers=2
	[10130.641740] video0: VIDIOC_G_CTRL: error -22: id=0x980927, value=0
	[10130.642770] video0: VIDIOC_REQBUFS: count=0, type=vid-cap, memory=mmap
	[10130.642819] video0: VIDIOC_CREATE_BUFS: index=0, count=0, memory=mmap, type=vid-cap, width=640, height=480, pixelfor
	mat=YUYV, field=none, bytesperline=1280, sizeimage=614400, colorspace=8, flags=0x0, ycbcr_enc=1, quantization=1, xfer_f
	unc=2
	[10130.658541] video0: VIDIOC_G_CTRL: error -22: id=0x980927, value=0
	[10130.662770] video0: VIDIOC_REQBUFS: count=3, type=vid-cap, memory=mmap
	[10130.662852] video0: VIDIOC_QUERYBUF: 00:00:00.00000000 index=0, type=vid-cap, flags=0x00002000, field=any, sequence=
	0, memory=mmap, bytesused=0, offset/userptr=0x0, length=614400
	[10130.662892] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000
	[10130.662917] video0: VIDIOC_QUERYBUF: 00:00:00.00000000 index=1, type=vid-cap, flags=0x00002000, field=any, sequence=
	0, memory=mmap, bytesused=0, offset/userptr=0x96000, length=614400
	[10130.662952] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000
	[10130.662967] video0: VIDIOC_QUERYBUF: 00:00:00.00000000 index=2, type=vid-cap, flags=0x00002000, field=any, sequence=
	0, memory=mmap, bytesused=0, offset/userptr=0x12c000, length=614400
	[10130.663002] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000
	[10130.666880] video0: VIDIOC_STREAMON: type=vid-cap
	[10130.857484] video0: VIDIOC_CREATE_BUFS: index=3, count=1, memory=mmap, type=vid-cap, width=640, height=480, pixelfor
	mat=YUYV, field=none, bytesperline=1280, sizeimage=614400, colorspace=8, flags=0x0, ycbcr_enc=1, quantization=1, xfer_f
	unc=2
	[10130.857585] video0: VIDIOC_QUERYBUF: 00:00:00.00000000 index=3, type=vid-cap, flags=0x00002000, field=any, sequence=
	0, memory=mmap, bytesused=0, offset/userptr=0x1c2000, length=614400
	[10130.857627] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000
	[10131.022069] video0: VIDIOC_STREAMOFF: type=vid-cap

V4L2核心框架跟踪

可以使用以下命令来启用 V4L2 核心框架[3 ]的跟踪：
	Board $> echo 0x3 > /sys/module/videobuf2_core/parameters/debug
	Board $> echo 0x3 > /sys/module/videobuf2_v4l2/parameters/debug
跟踪在内核日志缓冲区中的输出：
	Board $> dmesg

	[11875.487933] vb2-core: __setup_offsets: buffer 0, plane 0 offset 0x00000000
	[11875.501731] vb2-core: __setup_offsets: buffer 1, plane 0 offset 0x001fb000
	[11875.514901] vb2-core: __setup_offsets: buffer 2, plane 0 offset 0x003f6000
	[11875.532298] vb2-core: __setup_offsets: buffer 3, plane 0 offset 0x005f1000
	[11875.540019] vb2-core: __vb2_queue_alloc: allocated 4 buffers, 1 plane(s) each
	[11875.563689] vb2_dc_mmap: mapped dma addr 0xf1900000 at 0xb4f05000, size 2076672
	[11875.571174] vb2-core: vb2_mmap: buffer 0, plane 0 successfully mapped
	[11875.589656] vb2-core: vb2_core_qbuf: qbuf of buffer 0 succeeded
	[11875.595684] vb2_dc_mmap: mapped dma addr 0xf1b00000 at 0xb4d0a000, size 2076672
	[11875.603062] vb2-core: vb2_mmap: buffer 1, plane 0 successfully mapped
	[11875.609668] vb2-core: vb2_core_qbuf: qbuf of buffer 1 succeeded
	[11875.615642] vb2_dc_mmap: mapped dma addr 0xf1d00000 at 0xb4b0f000, size 2076672
	[11875.623016] vb2-core: vb2_mmap: buffer 2, plane 0 successfully mapped
	[11875.629628] vb2-core: vb2_core_qbuf: qbuf of buffer 2 succeeded
	[11875.635617] vb2_dc_mmap: mapped dma addr 0xf1f00000 at 0xb4914000, size 2076672
	[11875.642952] vb2-core: vb2_mmap: buffer 3, plane 0 successfully mapped
	[11875.649715] vb2-core: vb2_core_qbuf: qbuf of buffer 3 succeeded
	[11875.734058] vb2-core: vb2_core_streamon: successful
	[11875.961291] vb2-core: vb2_buffer_done: done processing on buffer 0, state: 6
	[11875.967036] vb2-core: vb2_core_dqbuf: returning done buffer
	[11875.972437] vb2-core: vb2_core_dqbuf: dqbuf of buffer 0, with state 0
	[11876.094639] vb2-core: vb2_buffer_done: done processing on buffer 1, state: 6
	[11876.100367] vb2-core: vb2_core_dqbuf: returning done buffer
	[11876.105788] vb2-core: vb2_core_dqbuf: dqbuf of buffer 1, with state 0

DCMI V4L2 内核驱动程序跟踪

可以使用下面的命令启用 DCMI 的动态调试跟踪[7 ]：
	Board $> echo "module stm32_dcmi +p" > /sys/kernel/debug/dynamic_debug/control
这是一个 5Mp jpeg 捕获的示例：
	Board $> gst-launch-1.0 v4l2src ! image/jpeg, width=2592, height=1944 ! fakesink
	Board $> dmesg

	[12706.715949] stm32-dcmi 4c006000.dcmi: Sensor format set to 0x4001 2592x1944
	[12706.721548] stm32-dcmi 4c006000.dcmi: Buffer format set to JPEG 2592x1944
	[12707.365947] stm32-dcmi 4c006000.dcmi: Sensor format set to 0x4001 2592x1944
	[12707.371551] stm32-dcmi 4c006000.dcmi: Buffer format set to JPEG 2592x1944
	[12707.437537] stm32-dcmi 4c006000.dcmi: Sensor format set to 0x4001 2592x1944
	[12707.443042] stm32-dcmi 4c006000.dcmi: Buffer format set to JPEG 2592x1944
	[12707.459767] stm32-dcmi 4c006000.dcmi: Setup queue, count=4, size=5038848
	[12707.518914] stm32-dcmi 4c006000.dcmi: buffer[0] phy=0xf1900000 size=5038848
	[12707.526068] stm32-dcmi 4c006000.dcmi: buffer[1] phy=0xf1e00000 size=5038848
	[12707.533299] stm32-dcmi 4c006000.dcmi: buffer[2] phy=0xf2300000 size=5038848
	[12707.541456] stm32-dcmi 4c006000.dcmi: buffer[3] phy=0xf2800000 size=5038848
	[12707.551443] stm32-dcmi 4c006000.dcmi: Start streaming, starting capture
	[12707.820885] stm32-dcmi 4c006000.dcmi: buffer[0] done seq=0, bytesused=499936
	[12708.087436] stm32-dcmi 4c006000.dcmi: buffer[1] done seq=1, bytesused=447472
	[12708.306415] stm32-dcmi 4c006000.dcmi: Stop streaming, errors=0 (overrun=0), buffers=2
	[12708.319095] stm32-dcmi 4c006000.dcmi: Start streaming, starting capture
	[12708.333571] stm32-dcmi 4c006000.dcmi: Stop streaming, errors=0 (overrun=0), buffers=0

如何调试

错误

在内核日志中无条件地跟踪错误：
		Board $> dmesg
	[   87.233672] stm32-dcmi 4c006000.dcmi: Some errors found while streaming: errors=1 (overrun=1), buffers=24

内存跟踪

帧需要大块连续内存，它们由 V4L2 框架通过 DMA 分配。可以使用以下方法跟踪这些分配：
	Board $> echo "module dma_contiguous +p" > /sys/kernel/debug/dynamic_debug/control
	Board $> echo "module videobuf2_dma_contig +p" > /sys/kernel/debug/dynamic_debug/control
VGA 预览后的轨迹
	[11311.617688] vb2_dc_mmap: mapped dma addr 0xf1900000 at 0xb3b6a000, size 614400
	[11311.617986] vb2_dc_mmap: mapped dma addr 0xf1a00000 at 0xb3ad4000, size 614400
	[11311.618071] vb2_dc_mmap: mapped dma addr 0xf1b00000 at 0xb3a3e000, size 614400
	[11311.764146] vb2_dc_mmap: mapped dma addr 0xf1c00000 at 0xb307c000, size 614400
4 帧VGA YUV422帧：640x480x2=614400字节

源代码位置

用户空间

内核空间

参考

  1. 维基百科上有关 V4L2 Linux 内核框架的信息
  2. Linux Media基础结构用户空间 API >> 第一部分-Linux API视频
  3. 媒体子系统内核内部 API >> 1. Video4Linux设备
  4. MB1379相机子板
  5. STM32MP157C-EV1评估板 CN7 摄像机传感器连接器
  6. STM32MP15 评估板
  7. 如何使用内核动态调试
取自“http://wiki.100ask.org/index.php?title=V4L2_camera_overview&oldid=6097”