匿名
未登录
登录
百问网嵌入式Linux wiki
搜索
查看“100ask stm32mp157 pro”的源代码
来自百问网嵌入式Linux wiki
名字空间
页面
讨论
更多
更多
页面选项
Read
查看源代码
历史
←
100ask stm32mp157 pro
因为以下原因，您没有权限编辑本页：
您所请求的操作仅限于该用户组的用户使用：
用户
您可以查看与复制此页面的源代码。
[[File:导学.mp4|800px|600px|center]] = 先看上面视频里提到的第1篇、第2篇视频，开始学！ = 入门指南= == 硬件资源== === 核心板参数=== === 底板参数=== === 引脚分布列表=== == 软件资源== == CortexA7功能体验== === 启动开发板=== === 网络功能=== ==== CAN功能==== ==== 以太网功能==== ==== 4G模块使用==== ==== 蓝牙功能体验==== ==== WiFi功能体验==== === 低速设备功能=== ==== 串口功能==== ==== I2C总线使用==== ==== SPI总线使用==== ==== GPIO LED使用==== ==== GPIO输入输出==== === 高速类设备功能=== ==== USB Host功能==== ==== USB OTG功能==== === 音频功能=== === 显示触摸功能=== ==== LCD使用==== ==== 背光调节==== ==== 播放视频==== ==== Qt应用==== ==== Camera功能==== ==== 触摸功能==== === 模拟设备功能=== ==== ADC采样==== === 其它功能=== ==== RTC功能==== == 协处理器M4功能体验== === led灯演示=== === 调试功能=== ==== JTAG和SWD功能==== == 开发板系统配置== === 文件传输功能=== ==== NFS网络文件系统==== ==== SCP安全拷贝==== ==== SFTP安全文件传输协议==== === OpenGL Benchmark=== === PyQt5应用=== === 自动启动应用=== ==== rc.local方式==== ==== systemd service方式==== === 如何校验触摸坐标=== === 网口固定MAC地址=== === WiFi自动连接=== === 禁用或启用CPU核心=== === 设置时区时间=== === WiFi设备配置hostapd模式=== === U-Boot操作GPIO=== === Yocto中修改文件系统的用户相关信息=== === 配置以太网IP地址=== === 修改设备名称=== === 系统自动登录=== == 系统更新== === SD卡更新=== === USB更新=== == 体验Ubuntu-18.04系统== = 应用开发= == Linux应用开发== === 配置应用开发环境=== === GUI应用开发=== ==== Framebuffer应用开发==== ==== Qt应用开发==== ===== 安装QtCreator===== ===== 配置QtCreator===== ===== 测试Qt应用===== ===== 中文字体===== ===== Qt5 开发资源===== ===== Qt5 Golang===== ==== GTK应用开发==== === 4G模块应用=== ==== 华为ME909s-821模块==== ==== 移远EC20模块==== === 输入系统=== === 进程间通信=== === 多线程=== === 网络编程=== === GPIO编程=== === RTC编程=== === PWM编程=== === IIC应用编程=== === 串口和485编程(暂无)=== === linux_can编程=== === 存储设备=== === 网络通讯=== ==== TCP开发==== ==== UDP开发==== ==== MQTT开发==== === 视频声音类=== ==== FFMPEG==== ==== 声卡ALSA编程==== ==== 摄像头V4L2编程==== == 应用调试== = 构建系统= == 构建Linux系统== === 配置开发环境=== ==== 配置NFS==== === 获取系统源码=== === Boot 介绍=== === TF-A编译=== === U-Boot编译=== === Linux编译=== === Buildroot构建系统=== ==== Buildroot介绍==== ==== 构建Buildroot Linux==== ==== 更新Buildroot 中的U-Boot和Linux==== ==== Buildroot命令==== ==== 添加一个自己的软件包==== === Yocto构建系统=== ==== Yocto介绍==== ==== 构建Yocto Linux==== ==== 更新Yocto中的U-Boot和Linux==== ==== Bitbake命令==== ==== 添加yocto软件包==== == U-Boot开发== === 如何从U-Boot通过TFTP引导内核=== === 如何在SD卡上更新U-Boot=== === 如何在U-Boot中使用USB大容量存储=== === uboot下fdt设备树操作命令使用详解=== === uboot下下载命令使用详解=== === uboot下环境变量命令使用详解=== === uboot下执行控制命令使用详解=== === uboot下Flash内存命令使用详解=== === uboot下info命令使用详解=== === uboot下内存命令使用详解=== === uboot下混杂设备命令使用详解=== === uboot下特殊命令使用详解=== === U-Boot和Linux中文参考指南=== === uboot下存储设备操作命令使用详解=== == 外设配置== === Pinmux配置=== === dts层级结构=== === Audio类外设=== ==== WM8960芯片==== ==== SAI外设==== ==== SPDIFRX外设==== === GPIO LED驱动=== === GPIO按键驱动=== ==== GPIO矩阵键盘==== === Video类外设=== ==== DCMI外设==== ==== OV5640摄像头模组==== === 网络类外设=== ==== 4G模块驱动==== ===== EC200S模块===== ===== YUGA CLM920===== ==== FDCAN外设==== ===== CM4配置===== === 低速接口类外设=== ==== I2C外设==== ===== CM4配置I2C===== ==== SPI外设==== ===== CA7配置SPI===== ===== CM4使用SPI===== ===== spidev驱动===== ==== 串口外设==== ===== CA7串口设备树配置===== ===== CM4配置串口===== === 模拟类外设=== ==== ADC外设==== ===== CM4配置ADC===== ==== DAC外设==== ===== CM4配置DAC===== === DFSDM外设=== === 显示类外设=== ==== LCD背光驱动==== ==== DSI外设==== ==== LTDC外设==== === 核心类外设=== ==== RTC驱动==== ==== TIM外设==== ===== CA7配置Capture功能===== ===== CM4使用Timer===== ===== PWM输出配置===== ==== Watchdog外设==== ===== IWDG外设===== ===== WWDG外设===== ==== GPIO外设==== === 高速接口类外设=== ==== SDMMC外设==== ===== CM4配置SDMMC3===== ==== USB设备驱动==== ==== 存储类外设==== ===== FMC外设===== ===== QUADSPI外设===== ====== CM4配置QSPI====== ==== 安全类外设==== ===== CRC外设===== ===== CRYP外设===== ===== HASH外设===== ===== RNG外设===== = 嵌入式系统开发= == 内核跟踪调试== == 协处理器CM4开发== === 内存映射=== === MCU SRAM内部内存=== === RETRAM内部内存=== === SYSRAM内部内存=== === CM4协处理器管理=== ==== Linux Mailbox framework==== ==== Linux remoteproc framework==== ==== Linux RPMsg framework==== ==== 协处理器的资源管理==== ===== 动态系统资源更新服务===== ===== 外设分配请求服务===== ===== 系统资源配置集服务===== ==== 外设分配==== ===== 分配方法===== === Keil uVision=== === STM32CubeIDE 集成开发环境=== ==== 新建和导入工程==== === STM32CubeMP1=== === SW4STM32 集成开发环境=== ==== 安装SW4STM32集成开发环境===== ==== 开发方式===== ==== SW4STM32使用JLink调试器===== ==== SW4STM32配置SSH连接===== === 加载运行固件=== === 双核间高速数据传输=== = 硬件开发= == 核心板资源== ===启动说明=== ===引脚定义=== ===最小系统设计=== ===机械尺寸=== ===板载资源介绍=== ===电气参数=== === 连接器规格=== == 底板资源== === 100ASK-STM32MP157丝印=== === 100ASK-STM32MP157设计文件=== === 底板机械尺寸=== === 板载资源说明=== ==== Camera接口==== ==== MIPI DSI接口连接器==== ==== RGB LCD接口连接器==== =参考资源= ==Bootloard== {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |- valign="top" | width="33%" | *[[How_to_boot_the_kernel_via_TFTP_from_U-Boot]] *[[How_to_update_U-Boot_on_an_SD_card]] *[[How_to_use_USB_mass_storage_in_U-Boot]] *[[UBoot]] | width="33%" | *[[UBootCmdFDT]] *[[UBootCmdGroupDownload]] *[[UBootCmdGroupEnvironment]] *[[UBootCmdGroupExec]] *[[UBootCmdGroupFlash]] | width="33%" | *[[UBootCmdGroupInfo]] *[[UBootCmdGroupMemory]] *[[UBootCmdGroupMisc]] *[[UBootCmdGroupSpecial]] *[[UBootManual]] *[[UBootStorageDevices]] |} ==Linux内核相关== ===内核驱动相关=== {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" ! 高速通信设备 !! 低速通信设备 !! 网络子系统 |- valign="top" | width="33%" | *alsa声卡相关 :*[[ALSA_overview | linux alsa声卡概述]] :*[[ALSA_troubleshooting_grid | linux alsa声卡故障排除]] :*[[How_to_play_audio | 如何播放音频]] :*[[How_to_record_audio | 如何录音]] :*[[I2S_device_tree_configuration | I2S协议如何配置设备树]] :*[[I2S_Linux_driver | I2S协议linux驱动]] :*[[SAI_device_tree_configuration | SAI协议设备树配置]] :*[[SAI_Linux_driver | SAI协议Linux驱动]] :*[[Soundcard_configuration | 声卡配置]] :*[[SPDIFRX_device_tree_configuration | SPDIFRX协议设备树配置]] :*[[SPDIFRX_Linux_driver | SPDIFRX协议Linux驱动]] :*[[Audio_troubleshooting_grid | 音频故障排除]] :*[[PulseAudio | PulseAudio工具]] *USB设备相关 :*[[USB overview | USB 概述 ]] :*[[PHY overview | USB PHY 层架构概述 ]] :*[[USBH device tree configuration | USB设备树配置 ]] :*[[USBPHYC device tree configuration | USB PHY层设备树配置]] :*[[OTG device tree configuration | USB OTG 设备树配置]] | width="33%" | *CAN协议相关 :*[[CAN overview | CAN协议概述]] :*[[FDCAN device tree configuration|CAN设备树配置]] :*[[How_to_set_up_a_SocketCAN_interface|如何设置CAN套接字接口]] :*[[How to send or receive CAN data |如何发送或接收CAN数据]] *串口设备相关 :*[[ How to use TTY from an application | 如何通过app使用TTY]] :*[[How to use TTY with User Terminal | 如何在用户终端下使用TTY]] :*[[Serial TTY device tree configuration | 串行TTY设备树配置]] :*[[Serial TTY line discipline | 串行TTY线路描述]] :*[[Serial TTY overview | TTY 架构概述]] :*[[TTY tools | TTY调试工具]] *SPI设备相关 :*[[SPI overview | SPI架构概述 ]] :*[[SPI device tree configuration | SPI设备树配置]] :*[[How to use SPI | 如何使用SPI]] *I2C设备相关 :*[[I2C overview | I2C协议概述]] :*[[I2C i2c-dev | I2C设备 ]] :*[[I2C device tree configuration | I2C设备树配置]] :*[[I2C driver | I2C驱动]] :*[[I2C i2c-tools | I2C测试工具]] | width="33%" | *蓝牙相关 :*[[Bluetooth overview | 蓝牙概述 ]] :*[[Bluetooth device tree configuration | 蓝牙设备树配置]] :*[[How to scan BLE devices | 如何扫描低功耗蓝牙设备]] :*[[How to scan Bluetooth devices | 如何扫描标准蓝牙设备]] :*[[How to set up a Bluetooth connection |如何设置蓝牙设备连接]] *WIFI设备相关 :*[[WLAN overview|WIFI概述]] :*[[WLAN device tree configuration|WIFI设备树配置]] :*[[How to configure a wlan interface on client mode | 如何配置waln设备客户端模式]] :*[[How to configure a wlan interface on hotspot mode|如何配置wlan设备热点模式]] :*[[How to setup wifi connection|如何设置WiFi连接]] *以太网相关 :*[[Ethernet overview | 以太网概述 ]] :*[[How to configure ethernet interface | 如何配置以太网接口]] :*[[Ethernet device tree configuration | 网络设备树配置]] *网络测试 :*[[How to perform ping test | 如何执行ping测试]] :*[[How to perform ssh connection | 如何执行SSH连接]] :*[[Network tools | 网络工具]] :*[[Networking overview |网络概述]] :*[[Networking troubleshooting grid|网络故障排除]] |} ===内核调试相关=== {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |- valign="top" | width="33%" | *[[Blktrace]] *[[Dmesg and Linux kernel log]] *[[Ftrace]] *[[Ltrace]] *[[LTTng]] *[[Strace]] *[[Trace-cmd and kernelshark trace viewer]] | width="33%" | *[[Debugfs]] *[[Ethtool]] *[[Ifconfig]] *[[IP Linux command line]] *[[Kmemleak]] *[[Netdata]] *[[Netstat]] *[[Perf]] | width="33%" | *[[Pseudo filesystem]] *[[Sysdig]] *[[Sysprof]] *[[Sysstat tool suite]] *[[Systemtap]] *[[Tcpdump]] *[[Top Linux command line ]] *[[Valgrind]] |} ==文件系统相关== {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |- valign="top" | width="33%" | *[[Adding_packages_to_your_OS_image]] *[[Adding_yocto_packages]] *[[How_to_accelerate_JPEG_compression_and_decompression]] *[[How_to_access_information_in_sysfs]] *[[How_to_activate_HSI_and_CSI_oscillators_calibration]] *[[How_to_activate_the_Gcnano_GPU_debug_mode]] *[[How_to_add_a_customer_application]] *[[How_to_add_a_new_package_to_buildroot]] *[[How_to_avoid_proxy_issues]] *[[How_to_boot_the_kernel_via_TFTP_from_U-Boot]] *[[How_to_build_Linux_kernel_user_space_tools]] *[[How_to_change_the_CPU_frequency]] *[[How_to_check_that_a_device_tree_resource_is_correctly_set]] *[[How_to_compile_the_device_tree_with_the_Developer_Package]] *[[How_to_compile_the_device_tree_with_the_Distribution_Package]] *[[How_to_config_the_git]] *[[How_to_configure_system_resources]] *[[How_to_configure_uniprocessor_mode]] *[[How_to_create_a_new_open_embedded_layer]] *[[How_to_create_an_SDK_for_OpenSTLinux_distribution]] *[[How_to_create_EXT4_images]] *[[How_to_create_ubi_images]] *[[How_to_create_your_board_device_tree]] |width="33%" | *[[How_to_create_your_own_distribution]] *[[How_to_create_your_own_image]] *[[How_to_create_your_own_machine]] *[[How_to_create_your_product_from_design_to_manufacturing]] *[[How_to_cross-compile_with_the_Developer_Package]] *[[How_to_cross-compile_with_the_Distribution_Package]] *[[How_to_customize_the_Linux_kernel]] *[[How_to_debug_a_Linux_kernel_crash]] *[[How_to_debug_the_Gcnano_GPU_with_VTK]] *[[How_to_detect_memory_leaks]] *[[How_to_diagnose_a_boot_failure]] *[[How_to_disable_one_CPU]] *[[How_to_enable_earlyprintk_for_Linux_kernel]] *[[How_to_enable_Jailhouse]] *[[How_to_enable_the_microphone_of_a_USB_camera]] *[[How_to_get_Terminal]] *[[How_to_install_JAVA_JDK]] *[[How_to_install_the_git]] *[[How_to_integrate_an_external_software_package]] *[[How_to_manage_the_debian_packages_in_OpenSTLinux_distribution]] *[[How_to_optimize_the_boot_time]] *[[How_to_play_a_video]] |width="33%" | *[[How_to_populate_and_boot_a_board_with_OP-TEE]] *[[How_to_populate_the_SD_card_with_dd_command]] *[[How_to_record_with_arecord]] *[[How_to_set_rtc_system_clock]] *[[How_to_setup_wifi_connection]] *[[How_to_submit_a_git_pull_request]] *[[How_to_transfer_a_file_over_network]] *[[How_to_transfer_a_file_over_serial_console]] *[[How_to_update_U-Boot_on_an_SD_card]] *[[How_to_use_samba]] *[[How_to_use_STM32CubeProgrammer_to_populate_a_board]] *[[How_to_use_the_git_branch_command]] *[[How_to_use_the_git_log_command]] *[[How_to_use_the_git_reset_command]] *[[How_to_use_the_rz_command_to_serially_transfer_files]] *[[How_to_use_USB_mass_storage_in_U-Boot]] *[[Menuconfig_or_how_to_configure_kernel]] *[[Play_audio]] *[[Yocto_build_system_FAQs]] |} ===buildroot相关=== {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |- valign="top" | width="33%" | *[[Buildroot_Audio_and_video_applications]] *[[Buildroot_BuildOptions]] *[[Buildroot_Compressors_and_decompressors]] *[[Buildroot_Debugging_profiling_and_benchmark]] *[[Buildroot_Development_tools]] *[[Buildroot_Filesystem_and_flash_utilities]] *[[Buildroot_Networking_applications]] *[[How_to_add_a_new_package_to_buildroot]] | width="33%" | *[[Buildroot_Fonts_cursors_icons_sounds_and_themes]] *[[Buildroot_Games]] *[[Buildroot_Graphic_libraries_and_applications]] *[[Buildroot_Hardware_handling]] *[[Buildroot_Interpreter_languages_and_scripting]] *[[Buildroot_Libraries]] *[[Buildroot_Mail]] *[[Buildroot_Miscellaneous]] | width="33%" | *[[Buildroot_Package_managers]] *[[Buildroot_Real-Time]] *[[Buildroot_Security]] *[[Buildroot_Shell_and_utilities]] *[[Buildroot_System_tools]] *[[Buildroot_SystemConfiguration]] *[[Buildroot_TargetOptions]] *[[Buildroot_Text_editors_and_viewers]] *[[Buildroot_Toolchain]] |} ===yocto相关=== {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" |- valign="top" | width="33%" | *[[Adding_packages_to_your_OS_image]] *[[Adding_yocto_packages]] *[[Bitbake]] *[[How_to_create_your_own_image]] *[[How_to_create_your_own_machine]] *[[Yocto]] *[[Yocto_build_system_FAQs]] || || |} ===busybox相关=== ==应用相关==
返回至
100ask stm32mp157 pro
。
导航
导航
WIKI首页
官方店铺
资料下载
交流社区
所有页面
所有产品
MPU-Linux开发板
MCU-单片机开发板
Linux开发系列视频
单片机开发系列视频
所有模块配件
Wiki工具
Wiki工具
特殊页面
页面工具
页面工具
用户页面工具
更多
链入页面
相关更改
页面信息
页面日志
