搜索结果

• HDP Linux driver
  …hich allows the observation of internal signals. By using multiplexers, up to 16 signals of each of 8-bit output can be observed. The article explains: * How to configure, use and debug the driver
  2 KB（307个字） - 2020年5月8日 (五) 00:02
• LPTIM Linux driver
  * How to configure, use and debug the driver * What is the driver structure, and where the source code can be found.
  4 KB（574个字） - 2020年5月6日 (三) 23:27
• Linux Mailbox framework overview
  …erprocessor communication to exchange messages or signals between the host and the coprocessor cores. ** It is in charge of configuring and handling IRQ from the IPCC peripheral.
  3 KB（440个字） - 2020年5月7日 (四) 23:40
• Watchdog overview
  It explains how to activate the WDT interface and, based on examples, how to use it.<br /> …tware fault (for example, when the software is blocked in an infinity loop and cannot reload the timer before an elapsed time).
  4 KB（602个字） - 2020年5月7日 (四) 23:59
• Hardware random overview
  This article gives information about the hardware random (HWRNG) framework. …ess to RNG peripherals and focuses on supporting the hardware number generator.
  4 KB（504个字） - 2020年5月8日 (五) 22:24
• Coresight overview
  …rticle explains how Coresight IP is composed, how to configure it, and how to use it. …instrumentation and a comprehensive set of IP blocks to enable the debug & trace of the most complex, multi-core SoCs.
  6 KB（645个字） - 2020年5月7日 (四) 23:59
• How to get DRM KMS logs
  …"[[DRM KMS overview#Enable DRM/KMS traces with the sysfs | Enable DRM/KMS traces with the sysfs]]". [[Category:How to trace and debug]]
  305字节（44个字） - 2020年5月8日 (五) 22:30
• Core dump
  This article provides the initial information set needed to start the '''core dump''' Linux^&reg; service. {{:Trace_and_debug_tools_assignment_table_template}}
  3 KB（493个字） - 2020年11月2日 (一) 13:09
• How to monitor the GCNANO GPU load
  …te GCNANO GPU overview | GCNANO driver]] level, by using the following command: {{Board$}} (while true; do (tr -d '\n' < /sys/kernel/debug/gc/idle | awk -F" " '{printf("gpu load %.0f%%\n", $6*100/($4-$2));}'); slee
  1 KB（176个字） - 2020年5月8日 (五) 22:40
• top命令
  …l information to start using Linux^&reg; tracing, monitoring and debugging environments. …t|This chapter is useful when you already know the domain or the interface to search for}}.
  6 KB（871个字） - 2020年11月4日 (三) 18:04
• GPIOLib overview
  …n how the GPIOlib framework manages IOs/pins, how to configure it, and how to use it. …output as a certain level (0/1), or to set pin in input configuration, or to configure the GPIO as an interrupt line. More details about GPIO in the ker
  8 KB（1,200个字） - 2020年5月7日 (四) 23:50
• Linux RPMsg framework overview
  …sg framework is a virtio-based messaging bus that allows a local processor to communicate with remote processors available on the system. …a remote processor. It is based on virtio vrings to send/receive messages to/from the remote CPU over shared memory.
  6 KB（810个字） - 2020年5月7日 (四) 23:44
• Crypto API overview
  …ated to the parts of the kernel that deal with cryptography, such as IPsec and dm-crypt. The purpose of this article is to introduce the Crypto API framework:
  6 KB（943个字） - 2020年5月8日 (五) 22:24
• OpenGLES overview
  …eg;</sup> OpenGL^&reg; ES framework used to program GPU-based 2D and 3D graphic applications. {{Green|The objective of this chapter is to give general information about the XXX framework.}}
  10 KB（1,444个字） - 2020年5月8日 (五) 22:41
• Bluetooth overview、
  …plains how a Bluetooth framework is composed, how to configure it, and how to use it. …and exchange information using radio waves. This can be done securely. Bluetooth is only used for relatively short distances, typically of a few meters.<
  7 KB（924个字） - 2020年5月8日 (五) 22:11
• How to debug Weston
  ==Wayland logs== To get the logs of the wayland protocol messages, set this environment variable:
  630字节（91个字） - 2020年5月8日 (五) 22:56
• SAI Linux driver
  …激活SAI <ref name="SAI internal peripheral"/> Linux驱动程序： [[Menuconfig or how to configure kernel]]. == How to use ==
  2 KB（198个字） - 2020年11月5日 (四) 16:08
• Coprocessor resource table
  …features or configurations by the remote processor, such as trace buffers and/or supported Virtio devices used for the IPC. …emoteProc]] Linux^&reg; framework during the firmware load phase to:
  4 KB（619个字） - 2020年5月7日 (四) 23:31
• Linux remoteproc framework overview
  …ng the hardware differences. In addition it offers services to monitor and debug the remote coprocessor. …eproc''': this is the remote processor framework generic part. Its role is to:
  8 KB（1,196个字） - 2020年5月7日 (四) 23:41
• NVMEM overview
  …sup>&reg;</sup> framework manages BSEC OTP data and how to read/write from/to it.<p> It offers kernel space and user space interfaces to read and/or write data such as analog calibration data or MAC address.
  8 KB（1,097个字） - 2020年5月8日 (五) 22:21

查看（前20个 | 后20个）（20 | 50 | 100 | 250 | 500）